The first real-time profile control experiments integrating magnetic and kinetic variables were performed on DIII-D in view of regulating and extrapolating advanced tokamak scenarios to steady-state devices and burning plasma experiments. Device-specific, control-oriented models were obtained from experimental data using a generic two-time-scale method that was validated on JET, JT-60U and DIII-D under the framework of the International Tokamak Physics Activity for Integrated Operation Scenarios (Moreau et al 2011 Nucl. Fusion 51 063009). On DIII-D, these data-driven models were used to synthesize integrated magnetic and kinetic profile controllers. The neutral beam injection (NBI), electron cyclotron current drive (ECCD) systems and ohmic coil provided the heating and current drive (H&CD) sources. The first control actuator was the plasma surface loop voltage (i.e. the ohmic coil), and the available beamlines and gyrotrons were grouped to form five additional H&CD actuators: co-current on-axis NBI, co-current off-axis NBI, counter-current NBI, balanced NBI and total ECCD power from all gyrotrons (with off-axis current deposition). Successful closed-loop experiments showing the control of (a) the poloidal flux profile, Ψ(x), (b) the poloidal flux profile together with the normalized pressure parameter, βN, and (c) the inverse of the safety factor profile, , are described.

In order for ITER to be capable of operating in advanced tokamak operating regimes, characterized by a high fusion gain, good plasma confinement, magnetohydrodynamic stability and a non-inductively driven plasma current, for extended periods of time, several challenging plasma control problems still need to be solved. Setting up a suitable toroidal current density profile in the tokamak is key for one possible advanced operating scenario characterized by non-inductive sustainment of the plasma current. At the DIII-D tokamak, the goal is to create the desired current profile during the ramp-up and early flat-top phases of the plasma discharge and then actively maintain this target profile for the remainder of the discharge. The evolution in time of the toroidal current profile in tokamaks is related to the evolution of the poloidal magnetic flux profile, which is modelled in normalized cylindrical coordinates using a first-principles, nonlinear, dynamic partial differential equation (PDE) referred to as the magnetic diffusion equation. The magnetic diffusion equation is combined with empirical correlations developed from physical observations and experimental data from DIII-D for the electron temperature, the plasma resistivity and the non-inductive current drive to develop a simplified, control-oriented, nonlinear, dynamic PDE model of the poloidal flux profile evolution valid for low confinement mode discharges. In this work, we synthesize a robust feedback controller to reject disturbances and track a desired reference trajectory of the poloidal magnetic flux gradient profile by employing the control-oriented model of the system. A singular value decomposition of the static gain matrix of the plant model is utilized to identify the most relevant control channels and is combined with the dynamic response of system around a given operating trajectory to design the feedback controller. A general framework for real-time feedforward + feedback control of magnetic and kinetic plasma profiles was implemented in the DIII-D Plasma Control System and was used to demonstrate the ability of the feedback controller to control the toroidal current profile evolution in the DIII-D tokamak. These experiments constitute the first time ever a first-principles-driven, model-based, closed-loop magnetic profile controller was successfully implemented and tested in a tokamak device.

In tokamak fusion plasmas, control of the spatial distribution profile of the toroidal plasma current plays an important role in realizing certain advanced operating scenarios. These scenarios, characterized by improved confinement, magnetohydrodynamic stability, and a high fraction of non-inductively driven plasma current, could enable steady-state reactor operation with high fusion gain. Current profile control experiments at the DIII-D tokamak focus on using a combination of feedforward and feedback control to achieve a targeted current profile during the ramp-up and early flat-top phases of the shot and then to actively maintain this profile during the rest of the discharge. The dynamic evolution of the current profile is nonlinearly coupled with several plasma parameters, motivating the design of model-based control algorithms that can exploit knowledge of the system to achieve desired performance. In this work, we use a first-principles-driven, control-oriented model of the current profile evolution in low confinement mode (L-mode) discharges in DIII-D to design a feedback control law for regulating the profile around a desired trajectory. The model combines the magnetic diffusion equations with empirical correlations for the electron temperature, resistivity, and non-inductive current drive. To improve tracking performance of the system, a nonlinear input transformation is combined with a linear-quadratic-integral (LQI) optimal controller designed to minimize a weighted combination of the tracking error and controller effort. The resulting control law utilizes the total plasma current, total external heating power, and line averaged plasma density as actuators. A simulation study was used to test the controller's performance and ensure correct implementation in the DIII-D plasma control system prior to experimental testing. Experimental results are presented that show the first-principles-driven model-based control scheme's successful rejection of input disturbances and perturbed initial conditions, as well as target trajectory tracking.

No abstract

DIII-D experimental results are reported to demonstrate the potential of physics-model-based safety factor profile control for robust and reproducible sustainment of advanced scenarios. In the absence of feedback control, variability in wall conditions and plasma impurities, as well as drifts due to external disturbances, can limit the reproducibility of discharges with simple preprogrammed scenario trajectories. The control architecture utilized is a feedforward + feedback scheme where the feedforward commands are computed off-line and the feedback commands are computed on-line. In this work, a first-principles-driven (FPD), physics-based model of the q profile and normalized beta (β N) dynamics is first embedded into a numerical optimization algorithm to design feedforward actuator trajectories that steer the plasma through the tokamak operating space to reach a desired stationary target state that is characterized by the achieved q profile and β N. Good agreement between experimental results and simulations demonstrates the accuracy of the models employed for physics-model-based control design. Second, a feedback algorithm for q profile control is designed following an FPD approach, and the ability of the controller to achieve and maintain a target q profile evolution is tested in DIII-D high confinement (H-mode) experiments. The controller is shown to be able to effectively control the q profile when β N is relatively close to the target, indicating the need for integrated q profile and β N control to further enhance the ability to achieve robust scenario execution. The ability of an integrated q profile + β N feedback controller to track a desired target is demonstrated through simulation.