A monolithically integrated low linewidth optical comb is demonstrated by gain switching of a three-section laser device. The device consists of a slave and master section separated by a shared slotted mirror section. Wavelength tunability has been demonstrated by varying the electrical bias of each section. The number of comb lines is shown to almost double with the addition of optical injection from the master section into the slave. The unmodulated device has a full width half max linewidth of ∼ 500 kHz, while the comb line set were measured to be ∼ 600 kHz, with little degradation as a result of gain switching. The FSR (free spectral range) of the demonstrated comb is 4 GHz, which is tunable within the bandwidth of the device, with a central wavelength of 1580.3 nm.

A monolithically integrated dual-channel optical frequency comb source is demonstrated in this paper. Three lasers are integrated on a single chip using a regrowth-free fabrication process in a master-slave-slave configuration. The master laser’s power is split equally using a 1x2 multimode interference coupler and injection locks the two slave lasers. The slave lasers are gain-switched to produce dual optical frequency combs at 4.1 GHz and 5 GHz. To the best of our knowledge, this is the first demonstration of a dual optical frequency comb source with all light sources monolithically integrated in a photonic integrated circuit (PIC).

No abstract

No abstract

A custom-designed gain-switched frequency comb (GSFC) source was passively coupled to a medium finesse (F ≈ 522) cavity in off-axis configuration for the detection of ammonia (14NH3) in static dry air. The absorption of ammonia was detected in the near infrared spectral region between 6604 and 6607 cm−1 using a Fourier transform detection scheme. More than 30 lines of the GSFC output (free spectral range 2.5 GHz) overlapped with the strongest ro-vibrational ammonia absorption features in that spectral region. With the cavity in off-axis configuration, an NH3 detection limit of ∼3.7 ppmv in 20 s was accomplished in a laboratory environment. The experimental performance of the prototype spectrometer was characterized; advantages, drawbacks and the potential for future applications are discussed.