No abstract

No abstract

a b s t r a c tIn order to investigate the effect PMMA bone cement chemistry has on the fretting corrosion of cemented femoral stems, a novel test setup with integrated electrochemistry was developed and conducted in part reference to ISO 7206-4:2010. Ultima TPS TM femoral stems were cemented into a specially prepared delrin moulds using a third generation cementing technique similar to the procedure used in-vivo. Three commercially available PMMA bone cements were tested in order to understand the role bone cement chemistry plays on the fretting-corrosion rates at the stem-cement interface. Each stem-cement component was then orientated and set in place using laboratory grade PMMA cement, immersed in 0.9% NaCl and subjected to 500,000 cycles of cyclic loading at 1 Hz. Intermittent Open Circuit Potential (OCP) and Linear Polarisation Resistance (LPR) measurements were conducted in order to assess the effect PMMA bone cement chemistry has on the localised dissolution of cemented femoral stems. Macroscopic observation and scanning electron microscopy with integrated energy dispersive X-ray analysis (SEM/EDX) was conducted in order to support the electrochemical findings.Crown

eprints@whiterose.ac.uk https://eprints.whiterose.ac.uk/ Reuse Unless indicated otherwise, fulltext items are protected by copyright with all rights reserved. The copyright exception in section 29 of the Copyright, Designs and Patents Act 1988 allows the making of a single copy solely for the purpose of non-commercial research or private study within the limits of fair dealing. The publisher or other rights-holder may allow further reproduction and re-use of this version -refer to the White Rose Research Online record for this item. Where records identify the publisher as the copyright holder, users can verify any specific terms of use on the publisher's website. TakedownIf you consider content in White Rose Research Online to be in breach of UK law, please notify us by emailing eprints@whiterose.ac.uk including the URL of the record and the reason for the withdrawal request. CHARACTERISATION OF THE SURFACE TOPOGRAPHY, TOMOGRAPHY HIGHLIGHTS: The tomography of retrieved femoral stems was characterised. Directionality and plastic deformation of the metallic surfaces was seen. Thick deposited layers were seen to occur within the stem-cement interfaces. Films of Cr2O3 bound with organic material play an important role in the degradation.

No abstract