An independent assessment of the dose delivery in ion therapy can be performed using positron emission tomography (PET). For that a distribution of positron emitters which appear as the result of interaction between ions of the therapeutic beam and the irradiated tissue is measured during or after the irradiation. Three concepts for PET monitoring implemented in various therapy facilities are considered in this paper. The in-beam PET concept relies on the PET measurement performed simultaneously to the irradiation by means of a PET scanner which is completely integrated into the irradiation site. The in-room PET concept allows measurement immediately after irradiation by a standalone PET scanner which is installed very close to the irradiation site. In the off-line PET scenario the measurement is performed by means of a standalone PET/CT scanner 10-30 min after the irradiation. These three concepts were evaluated according to image quality criteria, integration costs, and their influence onto the workflow of radiotherapy. In-beam PET showed the best performance. However, the integration costs were estimated as very high for this modality. Moreover, the performance of in-beam PET depends heavily on type and duty cycle of the accelerator. The in-room PET is proposed for planned therapy facilities as a good compromise between the quality of measured data and integration efforts. For facilities which are close to the nuclear medicine departments off-line PET can be suggested under several circumstances.

No abstract

Particle therapy positron emission tomography (PT-PET) allows for an in vivo and in situ verification of applied dose distributions in ion beam therapy. Since the dose distribution cannot be extracted directly from the β(+)-activity distribution gained from the PET scan the validation is done by means of a comparison between the reconstructed β(+)-activity distributions from a PT-PET measurement and from a PT-PET simulation. Thus, the simulation software for generating PET data predicted from the treatment planning is an essential part of the dose verification routine. For the dose monitoring of intra-fractionally moving target volumes the PET data simulation needs to be upgraded by using time resolved (4D) algorithms to account correctly for the motion dependent displacement of the positron emitters. Moreover, it has to consider the time dependent relative movement between target volume and scanned beam to simulate the accurate positron emitter distribution generated during irradiation. Such a simulation program is presented which properly proceeds with motion compensated dose delivery by scanned ion beams to intra-fractionally moving targets. By means of a preclinical phantom study it is demonstrated that even the sophisticated motion-mitigated beam delivery technique of range compensated target tracking can be handled correctly by this simulation code. The new program is widely based on the 3D PT-PET simulation program which had been developed at the Helmholtz-Zentrum Dresden-Rossendorf, Germany (HZDR) for application within a pilot project to simulate in-beam PET data for about 440 patients with static tumor entities irradiated at the former treatment facility of the GSI Helmholtzzentrum für Schwerionenforschung, Darmstadt, Germany (GSI). A simulation example for a phantom geometry irradiated with a tracked (12)C-ion beam is presented for demonstrating the proper functionality of the program.