This paper reviews recent developments and achievements in the program of planar foil instability experiments being performed at the AWE HELEN laser. Point projection Xray backlighting, with spectroscopy, is used to measure hydrodynamic mix in radiatively accelerated ablator/foil packages; the mix is identified in the experimental radiograph from the overlap of distinguishable spectral absorption features associated with each of the constituent materials.The first part of the paper describes the backlighting technique, and briefly summarizes progress made in the past two years, leading to the first results being obtained on a “high mix” Parylene-C ablator/molybdenum payload package. The second part considers the full analysis of one such ‘high mix’ shot (Shot 7772), describing how the spatial distribution of mix has been quantified and considering the various sources of error. Comparisons are made with both one-dimensional and two-dimensional hydrocode simulations. Finally, various improvements and extensions to the experiment and codes are indicated.

The Orion laser facility at the atomic weapons establishment (AWE) in the UK has been operational since April 2013, fielding experiments that require both its long and short pulse capability. This paper provides a full description of the facility in terms of laser performance, target systems and diagnostics currently available. Inevitably, this is a snapshot of current capability-the available diagnostics and the laser capability are evolving continuously. The laser systems consist of ten beams, optimised around 1 ns pulse duration, which each provide a nominal 500 J at a wavelength of 351 nm. There are also two short pulse beams, which each provide 500 J in 0.5 ps at 1054 nm. There are options for frequency doubling one short pulse beam to enhance the pulse temporal contrast. More recently, further contrast enhancement, based on optical parametric amplification (OPA) in the front end with a pump pulse duration of a few ps, has been installed. An extensive suite of diagnostics are available for users, probing the optical emission, x-rays and particles produced in laser-target interactions. Optical probe diagnostics are also available. A description of the diagnostics is provided.

Recent 2ω laser propagation and stimulated Raman backscatter (SRS) experiments performed on the Helen laser have been analyzed using the radiation-hydrodynamics code HYDRA [M. M. Marinak, G. D. Kerbel, N. A. Gentile, O. Jones, D. Munro, S. Pollaine, T. R. Dittrich, and S. W. Haan, Phys. Plasmas 8, 2275 (2001)]. These experiments utilized two diagnostics sensitive to the hydrodynamics of gasbag targets: a fast x-ray framing camera (FXI) and a SRS streak spectrometer. With a newly implemented nonlocal thermal transport model, HYDRA is able to reproduce many features seen in the FXI images and the SRS streak spectra. Experimental and simulated side-on FXI images suggest that propagation can be explained by classical laser absorption and the resulting hydrodynamics. Synthetic SRS spectra generated from the HYDRA results reproduce the details of the experimental SRS streak spectra. Most features in the synthetic spectra can be explained solely by axial density and temperature gradients. The total SRS backscatter increases with initial gasbag fill density up to ≈0.08 times the critical density, then decreases. Data from a near-backscatter imaging camera show that severe beam spray is not responsible for the trend in total backscatter. Filamentation does not appear to be a significant factor in gasbag hydrodynamics. The simulation and analysis techniques established here can be used in ongoing experimental campaigns on the Omega laser facility and the National Ignition Facility.

The National Ignition Facility (NIF) [J. A. Paisner, E. M. Campbell, and W. J. Hogan, Fusion Technol. 26, 755 (1994)], operating at green (2ω) light, has the potential to drive ignition targets with significantly more energy than the 1.8 MJ it will produce with its baseline, blue (3ω) operations. This results in a greatly increased “target design space,” providing a number of exciting opportunities for fusion research. These include the prospect of ignition experiments with capsules absorbing energies in the vicinity of 1 MJ. This significant increase in capsule absorbed energy over the original designs at ∼150 kJ could allow high-gain, high yield experiments on NIF. This paper reports the progress made exploring 2ω for NIF ignition, including potential 2ω laser performance, 2ω ignition target designs, and 2ω laser plasma interaction studies.

A series of underdense laser plasma interaction experiments performed on the Helen laser [M. J. Norman et al., Appl. Opt. 41, 3497 (2002)] at the Atomic Weapons Establishment (AWE), U.K., using 2ω light have uncovered a strong dependence of laser backscatter and hot electron production on plasma composition. Using low-Z materials, we find a behavior familiar from previous 3ω work, the interchange of stimulated Raman scattering for Brillouin scattering as we change from gases that have high ion wave damping (e.g., C5H12) to gases with low ion wave damping (e.g., CO2). However, as Z is increased, we find that Brillouin scattering drops while Raman scattering remains low. For gases with Z greater than 18, it is possible to have long scalelength, underdense plasmas with both low Brillouin and Raman backscatter losses. Complementary measurements of hot electron production show efficient production of hot electrons in C5H12 plasmas approaching 0.25ncr, but changing the plasma composition can greatly suppress the hot electron production, even near 0.25ncr. Additional experiments indicate that by adding small amounts of high Z dopant, significant changes to the backscatter and hot electron production in C5H12 targets may be produced.