The growing maturity of integrated photonic technology makes it possible to build increasingly large and complex photonic circuits on the surface of a chip. Today, most of these circuits are designed for a specific application. However, the increase in complexity creates an opportunity for a generation of photonic circuits that can be programmed in software for a wide variety of functions through a mesh of on-chip waveguides, tunable beam couplers and optical phase shifters. Here we discuss the state of this emerging technology, not just the recent developments in photonic building blocks and circuit architectures, but also the higher levels in the technology stack for the electronic control and programming strategies. We also cover the various possible applications in linear matrix operations, quantum information processing and microwave photonics and examine how these generic chips can accelerate the development of future photonic circuits by providing a higher-level platform for prototyping novel optical functionalities without the need for custom chip fabrication.

We experimentally demonstrate tunable, highly-stable frequency combs with high repetition-rates using a single, charge injection based silicon PN modulator. In this work, we demonstrate combs in the C-band with over eight lines in a 20-dB bandwidth. We demonstrate continuous tuning of the center frequency in the C-band and tuning of the repetition-rate from 7.5GHz to 12.5GHz. We also demonstrate through simulations the potential for bandwidth scaling using an optimized silicon PIN modulator. We find that the time varying free carrier absorption due to carrier injection, an undesirable effect in data modulators, assists here in enhancing flatness in the generated combs.

We demonstrate a technique to continuously tune center frequency and repetition rate of optical frequency combs generated in silicon microring modulators and bandwidth scale them. We utilize a drive frequency dependent, microwave power induced shifting of the microring modulator resonance. In this work, we demonstrate center frequency tunability of frequency combs generated in silicon microring modulators over a wide range (∼8nm) with fixed number of lines. We also demonstrate continuously tunable repetition rates from 7.5GHz to 15GHz. Further, we use this effect to demonstrate a proof-of-principle experiment to bandwidth scale an 8-line (20dB band) comb generated from a single ring modulator driven at 10GHz to a comb with 12 and 15 lines by cascading two and three ring modulators, respectively. This is accomplished by merging widely spaced ring modulator resonances to a common location, thus coupling light simultaneously into multiple cascaded ring modulators.

We demonstrate a multi-wavelength source with a high repetition rate of 25 GHz, spanning the entire C-band, of which 124 lines lie within 10 dB bandwidth. We exploit the spectral and temporal properties of dual carrier electro-optic combs to simultaneously enhance self-phase modulation (SPM) based broadening and increase the stimulated Brillouin scattering (SBS) threshold. Dual carrier combs are generated through electro-optic modulation of spectrally separated narrow linewidth carriers. They are spectrally broadened in a highly nonlinear fiber after amplification with an in-house built erbium ytterbium co-doped fiber amplifier. The temporal profile of the dual carrier combs consists of significantly narrow pulses (1.4-1.9 ps FWHM) in comparison to the single laser comb (16.5 ps FWHM), increasing the peak power and enhancing the SPM effects. Further, the spectral power is distributed across the comb lines, increasing the SBS threshold and thus the power scalability of the system. These two factors together boost the bandwidth of the spectrally broadened multi-wavelength source.