No abstract

No abstract

We report a systematic study of room-temperature ferromagnetism (RTFM) in pristine MgO thin films in their amorphous and nano-crystalline states. The as deposited dc-sputtered films of pristine MgO on Si substrates using a metallic Mg target in an O2 containing working gas atmosphere of (N2 + O2) are found to be X-ray amorphous. All these films obtained with oxygen partial pressure (PO2) ~10% to 80% while maintaining the same total pressure of the working gas are found to be ferromagnetic at room temperature. The room temperature saturation magnetization (MS) value of 2.68 emu/cm3 obtained for the MgO film deposited in PO2 of 10% increases to 9.62 emu/cm3 for film deposited at PO2 of 40%. However, the MS values decrease steadily for further increase of oxygen partial pressure during deposition. On thermal annealing at temperatures in the range 600 to 800 °C, the films become nanocrystalline and as the crystallite size grows with longer annealing times and higher temperature, MS decreases. Our study clearly points out that it is possible to tailor the magnetic properties of thin films of MgO. The room temperature ferromagnetism in MgO films is attributed to the presence of Mg cation vacancies.

The molecular dye is an essential component of the Dye sensitized solar cell (DSSC), and improvements in efficiency over the last 15 years have been achieved by tailoring the optoelectronic properties of the dye. The most successful dyes are based on ruthenium bipyridyl compounds, which are characterized by a large absorption coefficient in the visible part of the solar spectrum, good adsorption properties, excellent stability, and efficient electron injection. However, ruthenium-based compounds are relatively expensive, and organic dyes with similar characteristics and even higher absorption coefficients have recently been reported; solar cells with efficiencies of up to 9% have been reported. Organic dyes with a higher absorption coefficient could translate into thinner nanostructured metal oxide films, which would be advantageous for charge transport both in the metal oxide and in the permeating phase, allowing for the use of higher viscosity materials such as ionic liquids, solid electrolytes or hole conductors. Organic dyes used in the DSSC often bear a resemblance to dyes found in plants, fruits, and other natural products, and several dye-sensitized solar cells with natural dyes have been reported. This paper gives an over-view of the recent works in DSSC using the natural dyes as chromophores.