The utilization of apple tree pruning as an alternative raw material to produce cement-bonded particleboard was investigated. Experimental cement-bonded particleboards measuring 500×500×12 mm with a nominal density of 1400 kg/m3 were prepared in laboratory conditions using different ratios (100/0,75/25,50/50,25/75,0/100) of apple tree pruning chips mixed Red Pine wood chips. The following basic properties required by the TS EN 312 standards were evaluated; water absorption, thickness swelling, bending properties, and screw withdrawal strength. Results of the study indicate that the addition of apple pruning in the mix of cement-bonded particleboard significantly influences the properties tested. Mechanical properties of the tested boards decreased while absorption and thickness swelling values of the cement-bonded particleboard were increased as the portion of apple pruning in the mixture was increased. Experimental boards which include apple tree pruning up to 25 % still meet properties required by the standards for general purpose-use cement-bonded particleboards. Apple tree pruning chips may be an alternative raw material for the manufacturing of cement-bonded particleboard.