A dual-cavity opto-mechanical microwave oscillator (OM-MO) for microwave photonic (MWP) generation with ultra-narrow linewidth based on radial (R) guided acoustic modes of a single-mode fiber (SMF) is proposed and investigated experimentally. The dual-cavity OM-MO consists of a 5 km SMF main ring, which provides forward stimulated Brillouin scattering (FSBS) gain, and a 300 m SMF subring that achieves single-frequency output of the R07 guided acoustic mode based MWP (R07-MWP) with Vernier effect. At 300 mW 980 nm pump threshold power, the 319.79 MHz R07-MWP is generated by adjusting polarization controllers based on nonlinear polarization rotation effect, corresponding to the 7437th harmonic of the 43 kHz cavity round trip frequency. The 3 Hz ultra-narrow linewidth of R07-MWP is achieved by decreasing the intrinsic linewidth of the passive ring resonator. The acoustic-mode and longitudinal-mode suppression ratios reach 22 and 36 dB, respectively. Within 20 min of the stability experiment, the power and frequency stability fluctuation of the R07-MWP are ±1 dB and ±0.05 MHz, respectively. This ultra-narrow linewidth MWP generation technology has great potential in the communication field, especially in long-distance wireless communication transmission.

A narrow linewidth parity-time (PT) symmetric Brillouin fiber laser (BFL) based on dual-polarization cavity (DPC) with single micro-ring resonator (MRR) is proposed and experimentally investigated. A 10 km single-mode fiber provides SBS gain, while a DPC consisting of optical coupler, polarization beam combiner and a MRR, is used to achieve PT symmetry. Due to the reciprocity of light propagation in the MRR, the PT symmetry BFL based on DPC implements two identical feedback loops that are connected to one another, one with a Brillouin gain coefficient and the other with a loss coefficient of the same magnitude, to break a PT symmetric. Compared with existing BFL studies, this design does not call for frequency matching of compound cavities structures or without ultra-narrow bandwidth bandpass filters. In the experiment, the 3-dB linewidth of PT symmetry BFL based on DPC with single MRR is 11.95 Hz with the threshold input power of 2.5 mW, according to the measured linewidth of 239 Hz at the -20 dB power point. And a 40 dB maximum mode suppression ratio are measured. Furthermore, the PT symmetry BFL's wavelength is tuned between 1549.60 and 1550.73 nm. This design with single longitudinal mode output can be applied to high coherent communication systems.

A highly nonlinear, dispersion flattened hybrid nanofiber with a silicon/silica cross-slot-structure nanocore is proposed and analyzed, which is insensitive to polarization for implementing quasi-TE and quasi-TM fundamental modes transmission due to the cross slot effect. Simulation results show that fundamental mode with ultra-small mode effective areas and high nonlinearity at TE and TM polarizations, which are confined in the narrow cross slot by four silicon ribs, can be achieved via this cross-slot-structure core. Moreover, the cladding of four large-air-holes contributes to the tailoring of the group velocity dispersion (GVD) and further enhancment of the nonlinearity. Our results indicate that ultra-small Aeff of 0.098μm2 and flat anomalous GVD with less than 13.5 ps.km-1.nm-1 dispersion ripple at C-band are realizable.

A dual-ring parity-time (PT) symmetric Brillouin fiber laser (BFL) with an unbalanced polarization Mach-Zehnder interferometer (UP-MZI) is proposed and experimentally investigated. An UP-MZI consisting of optical coupler, polarization beam combiner (PBC) and two asymmetric length arms with 10 km and 100 m single-mode fiber, is used to achieve Vernier effect and PT symmetry. Due to the orthogonally polarized lights created in the PBC, the dual-ring PT symmetry BFL with an UP-MZI implements two unbalanced length feedback rings that are connected to one another, one long length ring with a Brillouin gain and the other short length ring with a loss of the same magnitude, to break a PT symmetric and maintain the Vernier effect. By contrast with existing PT symmetry BFL studies, this design does not require same lengths of the gain and loss loops, but can manipulate freely PT symmetry status in accordance with a rational scaling factor between them. Experimental results reveal that the 3-dB linewidth of dual-ring PT symmetry BFL with an UP-MZI is about 4.85 Hz with the threshold input power of 9.5 mW, in accordance with the 97 Hz measured linewidth at the -20 dB power point. Within 60 mins of the stability experiment, the power and frequency stability fluctuation are ±0.02 dB and ±0.137 kHz, respectively. Thanks to the two asymmetric ring lengths, the sidemode suppression ratio (SMSR) is optimized by 54 dB compared to that with the only long ring structure, 26 dB when using only the Vernier effect or 12 dB for existing PT symmetry BFL. This BFL design with single longitudinal mode and high SMSR output can be applied to high coherent communication and Brillouin-based microwave photonics systems with low phase noise.

In this paper, a novel microwave photonic filter (MPF) based on a single longitudinal mode Brillouin laser achieved by parity time (PT) symmetry mode selection is proposed, and its unparalleled ultra-narrow bandwidth as low as to sub-kHz together with simple and agile tuning performance is experimentally verified. The Brillouin fiber laser ring resonator is cascaded with a PT symmetric system to achieve this MPF. Wherein, the Brillouin laser resonator is excited by a 5 km single mode fiber to generate Brillouin gain, and the PT symmetric system is configured with Polarization Beam Splitter (PBS) and polarization controller (PC) to achieve PT symmetry. Thanks to the significant enhancement of the gain difference between the main mode and the edge mode when the polarization state PT symmetry system breaks, a single mode oscillating Brillouin laser is generated. Through the selective amplification of sideband modulated signals by ultra-narrow linewidth Brillouin single mode laser gain, the MPF with ultra-narrow single passband performance is obtained. By simply tuning the central wavelength of the stimulated Brillouin scattering (SBS) pumped laser to adjust the Brillouin oscillation frequency, the gain position of the Brillouin laser can be shifted, thereby achieving flexible tunability. The experimental results indicate that the MPF proposed in this paper achieves a single pass band narrow to 72 Hz and the side mode rejection ratio of more than 18 dB, with a center frequency tuning range of 0–20 GHz in the testing range of vector network analysis, which means that the MPF possesses ultra high spectral resolution and enormous potential application value in the domain of ultra fine microwave spectrum filtering such as radar imaging and electronic countermeasures.