No abstract

The sulfidation of nanoscale zerovalent iron (nZVI) has received increasing attention for reducing the oxidizability of nZVI and improving its reactivity toward heavy metal ions. Here, a sulfide (S)-modified attapulgite (ATP)-supported nanoscale nZVI composite (S-nZVI@ATP) was rapidly synthesized under acidic conditions and used to alleviate Cd2+ toxicity from an aqueous solution. The degree of oxidation of S-nZVI@ATP was less than that of nZVI@ATP, indicating that the sulfide modification significantly reduced the oxidation of nZVI. The optimal loading ratio was at an S-to-Fe molar ratio of 0.75, and the adsorption performance of S-nZVI@ATP for Cd2+ was significantly improved compared with that of nZVI@ATP. The removal of Cd2+ by S-nZVI@ATP was 100% when the adsorbent addition was 1 g/L, the solution was 30 mL, and the adsorption was performed at 25 °C for 24 h with an initial Cd2+ concentration of 100 mg/L. Kinetics studies showed that the adsorption process of Cd followed the pseudo-second-order model, indicating that chemisorption was the dominant adsorption mechanism. The adsorption of Cd2+ by S-nZVI @ATP is dominated by the complexation between the iron oxide or iron hydroxide shell of S-nZVI and Cd2+ and the formation of Cd(OH)2 and CdS precipitates.

In this study, attapulgite-supported nano zero-valent iron (nZVI@ATP) was synthesized by a liquid-phase reduction method using active attapulgite (ATP) as raw material, and used for Pb2+ remediation in aqueous solution. To understand the mechanism of Pb2+ removal, various techniques were used to characterize nZVI@ATP. The results showed that spherical nZVI particles were uniformly dispersed on the surface of ATP, and the agglomeration of nZVI particles was significantly weakened. The adsorption performance of nZVI@ATP for Pb2+ was greatly improved compared with that of ATP ore, in which the Fe/ATP mass ratio of 1:2 was the best loading ratio. Under the conditions of a temperature of 25 °C and a pH of 5.00, the initial concentration of Pb2+ was 700 mg/L, and the Pb2+ removal rate of nZVI@ATP was 84.47%. The adsorption of nZVI@ATP to Pb2+ was mainly a spontaneous endothermic reaction of heterogeneous surfaces, and the adsorption rate of nZVI@ATP to Pb2+ was proportional to pH in the range of 2–5.5. The presence of Na+, Mg2+, and Ca2+ can inhibit the removal of Pb2+, and Ca2+ has the strongest inhibition effect on the removal of Pb2+. The removal mechanism of Pb2+ by nZVI@ATP obtained from SEM-EDS, BET, XRD, FTIR and XPS included reduction, precipitation, and the formation of complexes.

Nanoscale zero-valent iron (nZVI) has a high chemical reactivity for heavy metals, but nZVI forms aggregate easily. In this study, a synthesis of sludge biochar supported nanoscale zero-valent iron (nZVI@SBC) by...

Nano zero-valent iron activated persulfate (nZVI/PS) advanced oxidation technology is a novel approach with advantages in treating high-concentration and refractory organic pollutants. This paper aims to provide a comprehensive review...