Climate change, global warming, urban air pollution, energy supply uncertainty and depletion, and rising costs of conventional energy sources are, among others, potential socioeconomic threats that our community faces today. Transportation is one of the primary sectors contributing to oil consumption and global warming, and natural gas (NG) is considered to be a relatively clean transportation fuel that can significantly improve local air quality, reduce greenhouse-gas emissions, and decrease the energy dependency on oil sources. Internal combustion engines (ignited or compression) require only slight modifications for use with natural gas; rather, the main problem is the relatively short driving distance of natural-gas-powered vehicles due to the lack of an appropriate storage method for the gas, which has a low energy density. The U.S. Department of Energy (DOE) has set some targets for NG storage capacity to obtain a reasonable driving range in automotive applications, ruling out the option of storing methane at cryogenic temperatures. In recent years, both academia and industry have foreseen the storage of natural gas by adsorption (ANG) in porous materials, at relatively low pressures and ambient temperatures, as a solution to this difficult problem. This review presents recent developments in the search for novel porous materials with high methane storage capacities. Within this scenario, both carbon-based materials and metal-organic frameworks are considered to be the most promising materials for natural gas storage, as they exhibit properties such as large surface areas and micropore volumes, that favor a high adsorption capacity for natural gas. Recent advancements, technological issues, advantages, and drawbacks involved in natural gas storage in these two classes of materials are also summarized. Further, an overview of the recent developments and technical challenges in storing natural gas as hydrates in wetted porous carbon materials is also included. Finally, an analysis of design factors and technical issues that need to be considered before adapting vehicles to ANG technology is also presented.

High surface area N-doped mesoporous carbon capsules with iron traces exhibit outstanding electrocatalytic activity for the oxygen reduction reaction (ORR) in both alkaline and acidic media. In alkaline conditions, they exhibit a more positive onset (0.94 V vs. RHE) and half-wave potentials (0.83 V vs. RHE) than commercial Pt/C, while in acidic media the onset potential is comparable to that of commercial Pt/C with a peroxide yield lower than 10 %. The Fe-N-doped carbon catalyst combines the high catalytic activity with remarkable performance stability (3500 cycles between 0.6 and 1.0 V vs. RHE), which stems from the fact that iron is coordinated to nitrogen. Additionally, the newly developed electrocatalyst is unaffected by the methanol cross-over effect in both acid and basic media, contrary to commercial Pt/C. The excellent catalytic behavior of the Fe-N-doped carbon, even in the more relevant acid medium, is attributable to the combination of chemical functions (N-pyridinic, N-quaternary and Fe-N coordination sites) and structural properties (large surface area, open mesoporous structure and short diffusion paths), which guarantees a large number of highly active and fully accessible catalytic sites and rapid masstransfer kinetics. Thereby, this catalyst represents an important step forward towards replacing Pt catalysts with cheaper alternatives. In this regard, an alkaline anion exchange membrane fuel cell was assembled with the Fe-Ndoped mesoporous carbon capsules as the cathode catalyst providing current and power densities matching those of a commercial Pt/C, which glimpses the practical applicability of the Fe-N-carbon catalyst.

High-performance nitrogen-doped carbon electrocatalysts for the oxygen reduction reaction have been synthesized by the rational design of their pore structure.

Nitrogen (N) doping is considered an effective design strategy to improve CO 2 adsorption in carbon materials. However, experimental quantification of such an effect is riddled with difficulties, due to the practical complexity involved in experiments to control more than one parameter, especially at the nanoscale level. Here, we use molecular simulations to clarify the role of N doping on the CO 2 uptake and the CO 2 /N 2 selectivity in representative carbon pore architectures (slit and disordered carbon structures) at 298 K. Our results indicate that N doping shows a marginal improvement on the CO 2 uptake, although it can improve the CO 2 /N 2 selectivity. CO 2 uptake and CO 2 /N 2 selectivity are predominantly controlled by the pore architecture as well as ultra-micropores; the tendency of linear CO 2 molecules to lie flat on the carbon surface favors the CO 2 uptake in slit pore architectures rather than disordered carbon pore structures. We also demonstrated through molecular simulations that the N doping effect may be difficult to exemplify experimentally if the material has a disordered pore architecture and complex surface chemistry (such as the presence of other functional groups).

No abstract