Tunable microwave and millimeter wave oscillators and bandpass filters with ultra-low phase noise play a critical role in electronic devices, including wireless communication, microelectronics, and quantum computing. Magnetic materials, such as yttrium iron garnet (YIG), possess ultra-low phase noise and a ferromagnetic resonance tunable up to tens of gigahertz. Here, we report structural and magnetic properties of single-crystal 60 and 130 nm-thick YIG films prepared by metal-organic decomposition epitaxy. These films, consisting of multiple homoepitaxially grown monolayers, are atomically flat and possess magnetic properties similar to those grown with liquid-phase epitaxy, pulsed laser deposition, and sputtering. Our approach does not involve expensive high-vacuum deposition systems and is a true low-cost alternative to current commercial techniques that have the potential to transform the industry.

In nature, load‐bearing polymeric materials that do not present significant trade‐off between elongation and elastic modulus are often found, but are rare in synthetic systems. One mechanism for emulating these natural systems is with functionally graded materials (FGMs). The development of synthetic FGM systems with varying moduli gradient using tuned poly(meth)acrylate multilayers is shown. Such localized tuning of crosslink density is shown as a mechanism to increase rigidity without significant compromise to maximum strain. The toughest FGM shows 43% higher tensile strength and 9% higher stiffness than copolymer elastomers with similar maximum strain (εmax ≈ 110%), increasing toughness by 25%. These improved tensile mechanical properties can be due to beneficial interlayer crack deflection and delamination. This gradient approach provides potential to improve toughness of various load‐bearing polymeric materials.