Cesium-containing triple cation perovskites are attracting significant attention as suitable tandem partners for silicon solar cells. The perovskite layer of a solar cell must strongly absorb the visible light and be transparent to the infrared light. Optical transmittance measurements of perovskite layers containing different cesium concentrations (0–15%) were carried out on purpose to evaluate the utility of the layers for the fabrication of monolithic perovskite/silicon tandem solar cells. The transmittance of the layers weakly depended on cesium concentration in the infrared spectral range, and it was more than 0.55 at 997 nm wavelength. It was found that perovskite solar cells containing 10% of cesium concentration show maximum power conversion efficiency.

Performance of a perovskite solar cell is largely influenced by the optoelectronic properties of metal halide perovskite films. Here we study the influence of cesium concentration on morphology, crystal structure, photoluminescence and optical properties of the triple cation perovskite film. Incorporation of small amount (x = 0.1) of cesium cations into Csx(MA0.17FA0.83)1-x Pb(I0.83Br0.17)3 leads to enhanced power conversion efficiency (PCE) of the solar cell resulting mainly from significant rise of the short-current density and the fill factor value. Further increase of Cs concentration (x > 0.1) decreases the film’s phase purity, carrier lifetime and correspondingly reduces PCE of the solar cell. Higher concentration of Cs (x ≥ 0.2) causes phase segregation of the perovskite alongside with formation of Cs-rich regions impeding light absorption.

The high efficiency of perovskite solar cells strongly depends on the quality of perovskite films and carrier extraction layers. Here, we present the results of an investigation of the photoelectric properties of solar cells based on perovskite films grown on compact and mesoporous titanium dioxide layers. Kinetics of charge carrier transport and their extraction in triple-cation perovskite solar cells were studied by using transient photovoltage and time-resolved photoluminescence decay measurements. X-ray diffraction analysis revealed that the crystallinity of the perovskite films grown on mesoporous titanium dioxide is better compared to the films grown on compact TiO2. Mesoporous structured perovskite solar cells are found to have higher power conversion efficiency mainly due to enlarged perovskite/mesoporous -TiO2 interfacial area and better crystallinity of their perovskite films.

No abstract

This paper presents a study of the photoluminescence properties of hybrid perovskite films deposited on titanium and magnesium zinc oxide films, as electron transport layers, using the spin-coating technique. The subject of the investigation was continuous wave photoluminescence versus temperature, excitation power and transient photoluminescence. Moreover, the paper discusses possible carrier recombination mechanisms. Complex temporal decay was approximated through the use of several models, but only the four-exponent model and the model using the sum of two hyperbolic functions provided a good agreement with the experimental data. The first attempt to replace titanium dioxide with magnesium zinc oxide in conjunction with the perovskite layer showed improved optical properties such as a weaker non-radiative recombination process and a longer decay time constant.