Static firing tests of a hybrid rocket motor using liquid nitrous oxide (N2O) as the oxidizer and high-density polyethylene (HPDE) as the fuel are analyzed using a novel approach to data reduction that allows histories for fuel mass consumption, nozzle throat erosion, characteristic exhaust velocity (c*) efficiency, and nozzle throat wall temperature to be determined experimentally. This is done by firing a motor under the same conditions six times, varying only the burn time. Results show that fuel mass consumption was nearly perfectly repeatable, whereas the magnitude and timing of nozzle throat erosion was not. Correlations of the fuel regression rate result in oxidizer port mass flux exponents of 0.62 and 0.76. There is a transient time in the c* efficiency histories of around 2.5 s, after which c* efficiency remains relatively constant, even in the case of excessive nozzle throat erosion. Although nozzle erosion was not repeatable, the erosion onset factors were similar between tests, and greater than values in previous research in which oxygen was used as the oxidizer. Lastly, nozzle erosion rates exceed 0.15 mm/s for chamber pressures of 4 to 5 MPa.

No abstract

A recently developed reconstruction technique is used to investigate graphite nozzle erosion in two scales of hybrid rocket motors, 30N-thrust class and 2000N-thrust class, using oxygen as the oxidizer and high-density polyethylene as the fuel. Thermocouple measurements taken from within the nozzles are used to estimate nozzle throat wall temperature. Forty-four static firing tests were conducted under varying experimental conditions to confirm the validity of the reconstruction technique results, investigate the conditions at the onset of erosion and to formulate an empirical predictive model of nozzle erosion rate. Results show that a single formula that treats the combustion gas as a single oxidizing agent for which heterogenous rate constants are functions of equivalence ratio can satisfactorily replicate the

No abstract

No abstract