If computerized tomography scanning shows SAH predominantly in the posterior fossa and no abnormalities are found on intracranial four-vessel angiographic study, proximal vertebral angiography should be performed to detect dural AVS at the craniocervical junction. The results of surgical intervention for this disease are quite satisfactory.

Object Pedicle screw fixation is a standard procedure of spinal instrumentation, but accurate screw placement is essential to avoid injury to the adjacent structures, such as the vessels, nerves, and viscera. The authors recently developed an intraoperative screw guiding method in which patient-specific laminar templates were used, and verified the accuracy of the multistep procedure in the thoracic spine. Methods Preoperative bone images of the CT scans were analyzed using 3D/multiplanar imaging software and the trajectories of the screws were planned. Plastic templates with screw guiding structures were created for each lamina by using 3D design and printing technology. Three types of templates were made for precise multistep guidance, and all templates were specially designed to fit and lock on the lamina during the procedure. Plastic vertebra models were also generated and preoperative screw insertion simulation was performed. Surgery was performed using this patient-specific screw guide template system, and the placement of screws was postoperatively evaluated using CT scanning. Results Ten patients with thoracic or cervicothoracic pathological entities were selected to verify this novel procedure. Fifty-eight pedicle screws were placed using the screw guide template system. Preoperatively, each template was found to fit exactly and to lock on the lamina of the vertebra models, and screw insertion simulation was successfully performed. Intraoperatively the templates also fit and locked on the patient lamina, and screw insertion was completed successfully. Postoperative CT scans confirmed that no screws violated the cortex of the pedicles, and the mean deviation of the screws from the planned trajectories was 0.87 ± 0.34 mm at the coronal midpoint section of the pedicles. Conclusions The multistep, patient-specific screw guide template system is useful for intraoperative pedicle screw navigation in the thoracic spine. This simple and economical method can improve the accuracy of pedicle screw insertion and reduce the operating time and radiation exposure of spinal fixation surgery.

This study reviews aneurysms of the proximal segment (A1) of the anterior cerebral artery in 38 patients (23 men and 15 women) and their surgical, angiographic, and clinical management. Thirty-seven aneurysms were saccular and one was fusiform. The incidence of A1 aneurysms among a total of 4295 aneurysm cases treated was 0.88%. Multiple aneurysms occurred in 17 patients (44.7%) of the 38 cases; in 10 (58.8%), there was bleeding from the A1 aneurysm. The aneurysms were classified into five categories according to the mode of origin of the aneurysm in relation to the A1 segment: in 21 cases, aneurysms originated from the junction of the A1 segment and a perforating artery; in eight, from the A1 segment directly; in six, from the proximal end of the A1 fenestration; and in two, from the junction of the A1 segment and the cortical branch. One patient had a fusiform aneurysm. Computerized tomography (CT) of these aneurysms revealed bleeding extending to the septum pellucidum similar to that of anterior communicating artery aneurysms. When performing radical surgery it is very important to recognize the characteristics of A1 aneurysms, including multiplicity, a high incidence of vascular anomalies (especially A1 fenestration), and their similarity to anterior communicating artery aneurysms on CT.

No abstract

Object Accurate insertion of C-2 cervical screws is imperative; however, the procedures for C-2 screw insertion are technically demanding and challenging, especially in cases of C-2 vertebral abnormality. The purpose of this study is to report the effectiveness of the tailor-made screw guide template (SGT) system for placement of C-2 screws, including in cases with abnormalities. Methods Twenty-three patients who underwent posterior spinal fusion surgery with C-2 cervical screw insertion using the SGT system were included. The preoperative bone image on CT was analyzed using multiplanar imaging software. The trajectory and depth of the screws were designed based on these images, and transparent templates with screw guiding cylinders were created for each lamina. During the operation, after templates were engaged directly to the laminae, drilling, tapping, and screwing were performed through the templates. The authors placed 26 pedicle screws, 12 pars screws, 6 laminar screws, and 4 C1–2 transarticular screws using the SGT system. To assess the accuracy of the screw track under this system, the deviation of the screw axis from the preplanned trajectory was evaluated on postoperative CT and was classified as follows: Class 1 (accurate), a screw axis deviation less than 2 mm from the planned trajectory; Class 2 (inaccurate), 2 mm or more but less than 4 mm; and Class 3 (deviated), 4 mm or more. In addition, to assess the safety of the screw insertion, malpositioning of the screws was also evaluated using the following grading system: Grade 0 (containing), a screw is completely within the wall of the bone structure; Grade 1 (exposure), a screw perforates the wall of the bone structure but more than 50% of the screw diameter remains within the bone; Grade 2 (perforation), a screw perforates the bone structures and more than 50% of the screw diameter is outside the pedicle; and Grade 3 (penetration), a screw perforates completely outside the bone structure. Results In total, 47 (97.9%) of 48 screws were classified into Class 1 and Grade 0, whereas 1 laminar screw was classified as Class 3 and Grade 2. Mean screw deviations were 0.36 mm in the axial plane (range 0.0–3.8 mm) and 0.30 mm in the sagittal plane (range 0.0–0.8 mm). Conclusions This study demonstrates that the SGT system provided extremely accurate C-2 cervical screw insertion without configuration of reference points, high-dose radiation from intraoperative 3D navigation, or any registration or probing error evoked by changes in spinal alignment during surgery. A multistep screw placement technique and reliable screw guide cylinders were the key to accurate screw placement using the SGT system.