No abstract

Flexible pressure sensors with high sensitivity and wide pressure response range are attracting considerable research interest for their potential applications as e-skins. Nowadays, it seems a dilemma to realize high-performance, multifunctional pressure sensors with a cost-effective, scalable strategy, which can simplify wearable sensing systems without additional signal processing, enabling device miniaturization and low power consumption. Herein, pressure sensors with ultrahigh sensitivity and a broad response pressure range are developed with a low-cost, facile method by combining strain-induced percolation behavior and contact area contributions. Because of their special surface structure and strain-induced conductive network formation behavior, these unique pressure sensors exhibit wide sensing range of 1 Pa to 500 kPa, ultrahigh sensitivity (1 × 106 and 3.1 × 104 kPa–1 in the pressure ranges of 1 Pa to 20 kPa and 20–500 kPa, respectively), fast signal response (<50 ms), low detection limit (1 Pa), and high stability over 500 loading/unloading cycles. These characteristics allow the devices to work as e-skins to monitor human pulse signals and finger touch. Moreover, these sensors illustrate precise electrical response to mechanical vibration, bending, and temperature stimuli, which afford the ability of detecting cell phone call-in vibration signals, joint bending, spatial pressure, and temperature distributions, indicating promising applications in next-generation wearable, multifunctional e-skins.

Abstract:A fibre-optic strain sensor based on a gourd-shaped joint multimode fibre (MMF) sandwiched between two single-mode fibres (SMFs) is described both theoretically and experimentally. The cladding layers of the two MMFs are reshaped to form a hemisphere using an electrical arc method and spliced together, yielding the required gourd shape. The gourd-shaped section forms a Fabry-Perot cavity between the ends of two adjacent but noncontacting multimode fibres' core. The effectiveness of the multimode interference based on the Fabry-Perot interferometer (FPI) formed within the multimode inter-fibre section is greatly improved resulting in an experimentally determined strain sensitivity of −2.60 pm/με over the range 0-1000 με. The sensing characteristics for temperature and humidity of this optical fibre strain sensor are also investigated.

Abstract-A novel relative humidity sensor based on a singlemode-side polished multimode-singlemode (SSPMS) fibre structure coated with gelatin material is reported. The sensing principle and fabrication method of the proposed sensor are presented. The experimental method is demonstrated to provide the optimum thickness of coating layers in order to achieve the highest sensitivity of 0.14 dB/%RH and a fast response time of 1000 ms for a given RH sensing range. The developed humidity fibre optic sensor based on a gelatin coating shows great potential for many applications such as industrial production, food processing and environmental monitoring.

No abstract