Ride comfort and handling performances are known conflicts for off-road vehicles. Recent publications focus on passenger vehicles on class B and class C roads, while, for off-road vehicles, they should be able to run on rougher roads: class D, class E, or class F roads. In this paper, a quarter vehicle model with nonlinear damping is established to analyze the suspension performance of a medium off-road vehicle on the class F road. The ride comfort, road holding, and handling performance of the vehicle are indicated by the weighted root mean square (RMS) value of the vertical acceleration of the sprung mass, suspension travel, and tire deflection. To optimize these objectives, the genetic algorithm (GA), particle swarm optimization (PSO), and a genetic algorithm based on the particle swarm optimization (GA-PSO) are initiated. The efficiency and accuracy of these algorithms are compared to find the best suspension parameters. The effect of the optimized method is validated by the field test result. The ride comfort, road holding, and handling performance are improved by approximately 20%.

No abstract

Lateral stability is quite essential for the vehicle. For the vehicle with an articulated steering system, the vehicle load and steering system performance is quite different from the passenger car with the Ackman steering system. To investigate the influence of the tire characteristics and vehicle parameters on lateral stability, a single-track dynamic model is established based on the vehicle dynamic theory. The accuracy of the built model is validated by the field test result. The investigated parameters include the tire cornering stiffness, vehicle load, wheelbase, and speed. Based on the snaking steering maneuver, the lateral stability criteria including the yaw rate, vehicle sideslip angle, tire sideslip angle, and lateral force are calculated and compared. The sensitivity analysis of the tire and vehicle parameters on the lateral stability indicators is initiated. The results demonstrated that the parameters that affect the lateral vehicle stability the most are the load on the rear part and the tire cornering stiffness. The findings also lay a foundation for the optimization of the vehicle’s lateral stability.

No abstract