We demonstrate an ultra-high-bandwidth Mach-Zehnder electro-optic modulator (EOM), based on foundry-fabricated silicon (Si) photonics, made using conventional lithography and wafer-scale fabrication, oxide-bonded at 200C to a lithium niobate (LN) thin film. Our design integrates silicon photonics light input/output and optical components, such as directional couplers and low-radius bends. No etching or patterning of the thin film LN is required. This hybrid Si-LN MZM achieves beyond 106 GHz 3-dB electrical modulation bandwidth, the highest of any silicon photonic or lithium niobate (phase) modulator.

With a tunable refractive index, magnetic fluid can be applied to the development of adjustable optical devices. In this work, a magnetic-fluid-based optical switch is designed and characterized. The optical switch is formed by sealing magnetic fluid between two glass prisms. When a light is incident to one side of one of the prisms, a reflected light from the magnetic fluid film comes out from the same prism, whereas a transmitted light through the film emits from the other prism. It was found that the intensity ratio of the reflected light to the transmitted light can be manipulated by varying the external magnetic field strength. This implies that the light intensity can be switched between two paths. The switching efficiency also depends on the incident angle of a light into the prism. We then theoretically derive the incident-angle dependent switching efficiency to clarify relevant physical mechanisms.

No abstract

No abstract

No abstract