This paper proposes a dc circuit breaker for voltage source converter (VSC) based high-voltage dc transmission (HVDC) systems. Technical challenges for applying dc circuit breakers are to increase blocking voltage and to suppress surge voltage at the current clearing. The proposed dc circuit breaker is a solid-state breaker which consists of a number of semiconductor devices in series. It maintains equal voltage balancing among the devices to apply it to high-voltage applications. Moreover, the surge voltage across the circuit breaker is reduced by employing a freewheeling diode. Considering a system rated at 300 MW in power and 250 kV in dc voltage, the conduction loss of the proposed circuit breaker is estimated to be 0.045% of the rated power. The value is smaller than the power loss of the VSCs. A downscaled HVDC system rated at 10 kW in power and 360 V in dc voltage was built and tested. A series of experimental results demonstrates the dc fault clearing and rapid restoration of power transmission. Index Terms-DC circuit breaker, fault protection, high-voltage dc transmission (HVDC), voltage-source converter (VSC).

This paper deals with a cascaded multilevel converter which has multiple dc voltage values (multi-voltage cascade converter, or hybrid multilevel converter) for a 6.6-kV transformerless distribution static synchronous compensator (D-STATCOM). A control method is proposed to realize dc voltage regulation of series-connected multiple cells in the STATCOM operation, making it possible to remove dc sources from all H-bridge cells. The simplified configuration without the dc sources makes the STATCOM small and lightweight. A downscaled STATCOM model rated at 220 V and 10 kVA is built and a series of verification tests is executed. Theoretical analysis and experimental results prove the stable operating performance of the proposed method in steady states and transient states.

No abstract

No abstract

No abstract