For use as electrical and electronics parts, or automobile and mechanical parts, toughened poly(pheny1ene sulfide) (PPS) is desired. For these applications, our investigation centered on improving the toughness of PPS and developing elastomer-toughened PPS and elastomer-toughened compounds of PPS. Using chemically treated PPS and an olefinic elastomer with a functional group, we developed elastomer-toughened PPS using a reactive processing method. In the PPS matrix, the elastomer is finely dispersed. While the notched Izod impact strength of the original PPS is about 1 kgcm/cm, elastomer-toughened PPS has a notched impact strength around 50 kgcm/cm. The notched fracture surface of elastomer-toughened PPS is observed using a scanning electron microscope. We concluded that the mechanism for the toughening is attributed to energy dissipation by matrix yield.
High‐resolution 13Carbon nuclear magnetic resonance (NMR) spectra of Nylons 4, 6, and 66 in the solid state were measured over a wide range of temperature. From the results, it was found that resonance lines of crystalline and noncrystalline components were separable and their chemical shifts were determined. The 13C chemical shift behavior is closely related to their conformation. The origin of the conformational effects on the chemical shifts is discussed.
High resolution 13C‐NMR spectra of nylon 6 samples crystallized under various conditions and of a drawn sample were measured at room temperature by the cross polarization/magic angle spinning (CP/MAS) and pulse saturation transfer/magic angle spinning techniques. Additionally, 13C‐NMR spectra of the drawn sample were measured at temperatures from 20 to 100°C by the CP/MAS technique and at 20 and 100°C by the low‐power decoupling/magic angle spinning technique. The nylon 6 structure in the solid‐state is discussed on the basis of these results. The solid‐state 13C chemical shift data are used for reference in a study of conformation in solution.
ABSTRACT:The polyphenylene sulfide/polyphenylene ether (PPS/PPE) alloy is desired for use as an engineering plastic. In this case, microdispersion of PPE in the PPS matrix is preferable. We have developed a new method for the preparation of a PPS/PPE alloy that has microdispersed PPE in the PPS matrix. The reactive processing of PPS with PPE gave a PPS/PPE alloy with a microdispersed PPE in the PPS matrix, using styrene-co-glycidyl methacrylate copolymer (SG) as a compatibilizer. Although the general properties of the PPS/PPE alloy did not depend on the PPE particle size, tensile strength at the weld part is found to be strongly dependent on PPE particle size. Only the finely dispersed PPE system gave tensile strength at the weld part comparable that of PPS. The PPS/PPE alloy shows superior property to PPS at elevated temperature and, moreover, attains the an advantage of precise molding.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.