No abstract

Purpose Opioids have been the main factor for drug overdose deaths in the United States. Current naloxone delivery systems are effective in mitigating the opioid effects only for hours. Naloxone-loaded poly(lactide-co-glycolide) (PLGA) microparticles were prepared as quick-and long-acting naloxone delivery systems to extend the naloxone effect as an opioid antidote. Methods The naloxone-PLGA microparticles were made using an emulsification solvent extraction approach with different formulation and processing parameters. Two PLGA polymers with the lactide:glycolide (L:G) ratios of 50:50 and 75:25 were used, and the drug loading was varied from 21% to 51%. Two different microparticles of different sizes with the average diameters of 23 μm and 50 μm were produced using two homogenization-sieving conditions. All the microparticles were critically characterized, and three of them were evaluated with β-arrestin recruitment assays. Results The naloxone encapsulation efficiency (EE) was in the range of 70-85%. The EE was enhanced when the theoretical naloxone loading was increased from 30% to 60%, the L:G ratio was changed from 50:50 to 75:25, and the average size of the particles was reduced from 50 μm to 23 μm. The in vitro naloxone release duration ranged from 4 to 35 days. Reducing the average size of the microparticles from 50 μm to 23 μm helped eliminate the lag phase and obtain the steadystate drug release profile. The cellular pharmacodynamics of three selected formulations were evaluated by applying DAMGO, a synthetic opioid peptide agonist to a μ-opioid receptor, to recruit β-arrestin 2. Conclusions Naloxone released from the three selected formulations could inhibit DAMGO-induced β-arrestin 2 recruitment. This indicates that the proposed naloxone delivery system is adequate for opioid reversal during the naloxone release duration. KEY WORDS β-arrestin 2 inhibition . DAMGO . drug loading . encapsulation efficiency . naloxone . opioid overdose . PLGA microparticles . zero-order release

The Special Issue Dedicated to Professor Nicholas Peppas Poly(lactide-co-glycolide) (PLGA) has been extensively used in making long-acting injectable formulations. The critical factors affecting the PLGA formulation properties have been adjusted to control the drug release kinetics and obtain desirable properties of PLGA-based drug delivery systems. The PLGA microparticle formation begins as soon as the drug/PLGA-dissolved in the organic solvent phase (oil phase) is exposed to the water phase. The initial skin (or shell) formation on the oil droplets occurs very quickly, sometimes in the matter of milliseconds, and studying the process has been difficult. The skin formation on the PLGA emulsion droplet surface that can affect the subsequent hardening steps is examined. PLGA droplets with different compositions are prepared. Using collimated light and a high-speed camera made it possible to detect the diffusion of acetonitrile from the oil phase into the water phase during the oil droplet formation. Although the skin formation is not visible on the surface of the oil phase droplet with the current setup, the droplet shapes, solid strand formation, and the difference in the spreading time suggest that the initial contact time between the oil and water phases in the range of a few seconds is critical to the properties of the skin.

Polyester–polyether block copolymers with thermogelling properties have been widely used in pharmaceutical and biomedical applications for their biocompatibility and degradation to nontoxic components. The biodegradable polymers, such as poly(lactide‐co‐glycolide) and poly(lactide‐co‐caprolactone) (PLCL), have been used as the polyester block. The most commonly used polyether has been poly(ethylene glycol) (PEG). The thermogelling polymers dissolve in cold water, but become a semisolid gel at higher temperatures, for example, body temperature. This thermogelling property, however, occurs only within very narrow molecular weight ranges of the polyester at given polyether blocks. Only a few hundred Dalton differences in the polyester block can turn a thermogelling polymer into a water‐insoluble polymer. This study describes the hydrophilic and hydrophobic block sizes for endowing the thermogelling property and a simple, water‐free, synthesis of new thermogelling PLCL–PEG–PLCL triblock polymers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48673.

Poly(lactide-co-glycolide) (PLGA)-based microparticle formulations have been a mainstay of long-acting injectable drug delivery applications for decades. Despite a long history of use, tools and techniques to analyze and understand these formulations are still under development. Recently, a new characterization method was introduced known as the surface analysis after sequential semisolvent impact using sequential semisolvent vapors. The vapor-based technique is named, for convenience, surface analysis of (semisolvent) vapor impact (SAVI). In the SAVI method, discretely controlled quantities of selected organic semisolvents in the vapor phase were applied to PLGA microparticles to track particle morphological changes by laser scanning confocal microscopy. Subsequently, the morphological images were analyzed to calculate mean peak height (S a ), core height (S k ), kurtosis (S ku ), dale void volume (V vv ), the density of peaks (S pd ), maximum height (H m ), and the shape ratio (R s ). Here, the SAVI method was applied to naltrexone-loaded microparticles manufactured internally and Vivitrol, a commercial formulation. SAVI analysis of these microparticles indicated that the two primary mechanisms controlling the naltrexone release were the formation of discrete, self-crystallized portions of naltrexone within the PLGA structure and the degradation of PLGA chains through nucleophilic substitution. The relatively higher amounts of naltrexone crystals resulted in prolonged release than lower amounts of crystals. Data from gel permeation chromatography, differential scanning calorimetry, and in vitro release measurements all point to the importance of naltrexone crystal formation. This study highlights the utility of SAVI for gaining further insights into the microstructure of PLGA formulations and using SAVI data to support research, product development, and quality control applications for microparticle formulations of pharmaceuticals.