Optional: link to the article To refer to or to cite this work, please use the citation to the published version:De Boevre M., Graniczkowska K., De Saeger S. (2015). Metabolism of modified mycotoxins studied through in vitro and in vivo models: an overview. Toxicology Letters 233,[24][25][26][27][28]

A highly sensitive, capacitive biosensor was developed to monitor trace amounts of an amphetamine precursor in aqueous samples. The sensing element is a gold electrode with molecular imprinted polymers (MIPs) immobilized on its surface. A continuous-flow system with timed injections was used to simulate flowing waterways, such as sewers, springs, rivers, etc., ensuring wide applicability of the developed product. MIPs, implemented as a recognition element due to their stability under harsh environmental conditions, were synthesized using thermo- and UV-initiated polymerization techniques. The obtained particles were compared against commercially available MIPs according to specificity and selectivity metrics; commercial MIPs were characterized by quite broad cross-reactivity to other structurally related amphetamine-type stimulants. After the best batch of MIPs was chosen, different strategies for immobilizing them on the gold electrode's surface were evaluated, and their stability was also verified. The complete, developed system was validated through analysis of spiked samples. The limit of detection (LOD) for N-formyl amphetamine was determined to be 10μM in this capacitive biosensor system. The obtained results indicate future possible applications of this MIPs-based capacitive biosensor for environmental and forensic analysis. To the best of our knowledge there are no existing MIPs-based sensors toward amphetamine-type stimulants (ATS).

An easy-to-operate membrane-based flow-through test for multiplex screening of four mycotoxins (zearalenone, deoxynivalenol, aflatoxin B, and ochratoxin A) in a variety of cereal-based feed ingredients and compound feeds, such as wheat, barley, soybean, wheat bran, rice, rice bran, maize, rapeseed meal, and sunflower meal, and various types of complete feed (duckling feed, swine feed, broiler feed, piglet feed) was developed and validated. First, the antibodies were evaluated by enzyme-linked immunosorbent assay and then employed in the membrane rapid test. The cutoff levels for zearalenone, deoxynivalenol, aflatoxin B, and ochratoxin A were 50, 200, 1, and 10 μg/kg, respectively, based on European regulations and consumers' requirements. As sample pretreatment, consecutive steps of extraction, dilution, solid-phase extraction by addition of C18 sorbent, and final filtration of supernatant were followed. Both the sample preparation and the analysis procedure were simple, cost-effective, and easy to perform on-site in a nonlaboratory environment. The impact of sample processing on the result of the experiment was investigated supported by experimental design. The validation procedure was performed on the basis of Commission Regulation 2006/401/EC. The numbers of false-positive and false-negative outcomes were <5%, going along with the Commission Decision 2002/657/EC. Liquid chromatography-tandem mass spectrometry was performed as a confirmatory technique.