Microspheres were prepared from a branched copolymer of DL-lactic acid with mannitol containing native albumin and albumin labelled with fluorescein isothiocyanate, using a rapid method of distribution of methylformate as the solvent of the copolymer from the intermediate phase of the multiple w/o/w emulsion. The primary w/o emulsion was prepared by the method of homogenization with a turbine or, alternatively, by the method of dispersion with ultrasound in modified vessels. Different additives in the external aqueous phase, such as polyvinyl alcohol or the gelatin hydrolyzate as emulsifiers were tested. Ammonium sulphate, methylformate or ethyl acetate were used as moderators of solidification of microspheres. The effect of these selected formulation parameters on the size, encapsulation efficiency, yield of microspheres and on the course of the BSA and FITC-BSA release in vitro conditions were examined.

Biodegradable implantable matrices containing bovine serum albumin were prepared from oligoesters by melting, and subsequently tested on in vitro albumin release. The linear poly (DL-lactic acid) and the branched terpolymer of DL-lactic acid, glycolic acid, and mannitol were synthesized. Products were of similar molecular weight and possessed different thermal and swelling characteristics. Oligoesters were loaded with 4% albumin and plasticized by 30% triacetin. Other additives added into the matrices as albumin stabilizers were divalent stearates and magnesium oxide. The influences of oligomer molecules constitution, divalent ion stearates or magnesium oxide addition, and triacetin concentration on the albumin release were quantified. SDS-PAGE revealed protein hydrolysis during the dissolution tests.