Background: Operative treatment is suggested for unstable type 3 acromioclavicular (AC) joint injuries; however, there is no clear consensus regarding the definition of an unstable type 3 injury. We propose a new radiographic method, the “Chiang Mai lean forward” view, to verify horizontal displacement in an unstable AC joint injury. Hypothesis: A radiograph taken with the torso leaning forward would allow the detection of a higher proportion of AC joint injuries. Study Design: Descriptive laboratory study. Methods: A total of 20 shoulders from 10 fresh whole-body cadaveric specimens (mean age, 68.8 years) were tested at 3 different torso leaning angles (30°, 45°, and 60°) to determine the best position for projecting the x-ray beam. The shoulders were dissected sequentially starting with the AC ligament (stage 1), then additional sectioning of the partial coracoclavicular (CC) ligament with either the trapezoid ligament cut first (stage 2A) or the conoid ligament cut first (stage 2B), and finally complete sectioning of the CC ligament (stage 3). Radiography was performed after each stage to evaluate the degree of displacement of the anterior border of the acromion relative to the anterior border of the clavicle. Paired t tests were used to compare the degree of displacement at each stage to that of the shoulder before cutting. Results: Leaning at an angle of 30° provided better visualization of the AC joint in the “Chiang Mai lean forward” view. Compared with the intact condition, complete isolated cutting of the AC ligament produced 5.21 mm of horizontal displacement of the AC joint ( P < .0001), complete tearing of the AC ligament and partial cutting of the CC ligament resulted in a displacement of <12 mm (7.91 mm at stage 2A [ P = .0003] and 8.10 mm at stage 2B [ P = .0013]), and complete tearing of both the AC and the CC ligaments resulted in a displacement of 26.37 mm ( P < .0001). Conclusion: The “Chiang Mai lean forward” radiographic view is a potentially useful tool for determining the degree of the injury and the stability of the AC joint.