No abstract

In this study top emission organic light-emitting diodes (TE-OLED) were successfully fabricated on flexible PET/multilayer disordered silver nanonetwork (MDSN) substrate with conventional LiF/Al as a semitransparent cathode and Ag as a reflective anode. The effects of the hole injection layer, anode buffer layer, and an electron injection layer on the luminescence characteristics of TE-OLEDs were investigated. At first, the thickness of cathode Al is adjusted based upon the overall transmittance of the top-emission cathode and its conductivity. There is a high energy barrier for the hole between the work function of the anode Ag (4.2 eV) and the NPB highest occupied molecular orbital (HOMO) energy level (5.5 eV), which is not favorable for hole injection. This study tested four types of hole injection layer (HIL) materials. Finally, MoO3 was selected as an optimal HIL material, and the optimum thickness was adjusted, enabling the hole to be injected smoothly from the anode to the NPB and then to an emitting layer. The TE-OLED luminance reached 268 cd/m2. There is a high energy barrier between the work function of Ag and MoO3 HOMO (5.3 eV)—about 1.1 eV—which is still not conducive to the hole injection, so a thin layer of high work function metal Au (work function 5.1 eV) was added to the top of the anode silver, which more matches with the MoO3 energy level. It can make the hole easier to inject from the anode to MoO3 (HIL) and protect the silver from oxidation. At 8 V, the luminance is increased to 413.7 cd/m2, and the current efficiency is 0.81 cd/A. The luminance is significantly improved. An electron transport/hole blocking layer TPBi (10 nm) was added to enhance the electron transport capability and effectively block the holes with higher electron mobility and a higher HOMO energy level of TPBi. So that more holes can remain in the emitting layer and increase the chance of the electron-hole recombination to improve the luminance and current efficiency of TE-OLED. At 8 V, the luminance and current efficiency can reach 611.4 cd/m2 and 0.95 cd/A, respectively.

No abstract

In this study, white organic light-emitting diodes (OLEDs) consisting of red quantum dots (RQD) and green quantum dots (GQD) were investigated. These are the most exciting new lighting technologies that have grown rapidly in recent years. The white OLED development processes used consisted of the following methods: (a) fabrication of a blue single-emitting layer OLED, (b) nanoimprinting into QD photoresists, and (c) green and red QD photoresists as color conversion layers (CCL) excited by blue OLEDs. To fabricate the blue OLED, the HATCN/TAPC pair was selected for the hole injection/transport layer on ITO and TPBi for the electron transport layer. For blue-emitting material, we used a novel polycyclic framework of thermally activated delayed fluorescence (TADF) material, ν-DABNA, which does not utilize any heavy metals and has a sharp and narrow (FWHM 28 nm) electroluminescence spectrum. The device structure was ITO/HATCN (20 nm)/TAPC (30 nm)/MADN: ν-DABNA (40 nm)/TPBi (30 nm)/LiF (0.8 nm)/Al (150 nm) with an emitting area of 1 cm × 1 cm. The current density, luminance, and efficiency of blue OLEDs at 8 V are 87.68 mA/cm2, 963.9 cd/m2, and 1.10 cd/A, respectively. Next, the bottom emission side of the blue OLED was attached to nanoimprinted RQD and GQD photoresists, which were excited by the blue OLED in order to generate an orange and a green color, respectively, and combined with blue light to achieve a nearly white light. In this study, two different excitation architectures were tested: BOLED➔GQD➔RQD and BOLED➔RQD➔GQD. The EL spectra showed that the BOLED➔GQD➔RQD architecture had stronger green emissions than BOLED➔RQD➔GQD because the blue OLED excited the GQD PR first then RQD PR. Due to the energy gap architectures in BOLED-GQD-RQD, the green QD absorbed part of the blue light emitted from the BOLED, and the remaining blue light penetrated the GQD to reach the RQD. These excited spectra were very close to the white light, which resulted in three peaks emitting at 460, 530, and 620 nm. The original blue CIE coordinates were (0.15, 0.07). After the excitation combination, the CIE coordinates were (0.42, 0.33), which was close to the white light position.

This paper concentrates on the design, analysis, and development of fixed-wing hand launch unmanned aerial vehicle (UAV). This flight can able to carry the payloads of 0.8. The design process involves the conceptual, preliminary, and detailed design. This paper involves the investigation of the aerodynamic characteristics over the wing to enhance the aerodynamic design of the UAV. This analysis includes estimating the best gliding ratio to increase the flight mission and attain the maximum altitude. This simulation will be performed for subsonic flow with Mach number 0.04202(14.3m/s). The manufacturing of the UAV is done using composite materials like glass fiber of both (1mm and 2 mm) thickness, carbon fiber of 2mm, and carbon rod is used for connecting the empennage to the fuselage. The detailed design has been done in CATIA V5 and the analysis of the wing has been done using XFLR, ANSYS (fluent).