No abstract

No abstract

An ecological vitrimer is being developed using activated carbon pyrochar from municipal mixed plastic waste pyrolysis into an epoxy composite. Durable vitrimeric materials may be created by adding pyrochar to polymeric composites. Due to their ductility, reusability, and recyclability, vitrimeric materials have become popular and reliable materials. As a result, the self-healing temperature of composite vitrimers is lower via disulfide exchanges than that of virgin epoxy vitrimers. Additionally, compressive studies have been used to study self-healing capacities, and modulus variations have been used to highlight changes in the healing efficiency of the materials.

Municipal mixed plastic waste (MMPW) recycling is an innovative way to turn environmental waste into energy fuels. In the present study, a thermochemical process was applied to depolymerize MMPW to produce hydrocarbon fuels known as plasto-oil. The obtained plasto-oil was blended with conventional diesel to test the performance of the PCCI-mode single-cylinder, four-stroke, direct-injection diesel engine. The PCCI combustion mixture was tested with 15% and 30% fuel vapor to ensure homogeneity with and without exhaust gas recirculation. The modified engine findings were compared to a standard conventional engine. At higher loads, PCCI combustion showed reduced emission of carbon monoxide and nitrogen oxides. While the thermal braking efficiency was marginally reduced at all engine loads while using the blends. The results showed that with and without 10% exhaust gas recirculation, an increase in air mix reduced NOx emissions; however, in the case of smoke emissions, an opposite trend was observed. A blend of plasto-oils also decreased CO and unburned hydrocarbon (HC) emissions at higher loads. In conclusion, it was shown that plasto-oils combined with conventional diesel fuel outperformed diesel fuel alone.