We demonstrate a highly sensitive whispering gallery mode (WGM) relative humidity (RH) sensor based on a glycerol microdroplet. WGMs were excited using a 760 nm tunable semiconductor laser. We used free space coupling, which is effective when using a liquid resonator. A detailed analysis of different parameters influencing the sensor’s characteristics (sensitivity, hysteresis, resolution, stability, and temperature) is presented. The sensitivity of the sensor is one of the highest reported (2.85 nm/% RH in the range 50–70% RH with the resolution 1 × 10−4% RH). This type of humidity sensor has several advantages, such as high sensitivity, extended lifetime, good repeatability, and low cost, as well as the use of a non-toxic and environmentally friendly liquid.

No abstract

Among the different types of photonic sensor devices, optical whispering gallery mode resonators (WGMRs) have attracted interest due to their high level of sensitivity, small size, and ability to perform real-time temperature measurements. Here we demonstrate the applicability of temperature measurements using WGMR in both air and liquid environments. We also show that WGMR allowed measurements of the refractive index variations in an evaporating glucose–water solution droplet. The thermal tuning of WGMR can be reduced by coating WGMRs with a thin layer of polymethyl methacrylate (PMMA). Dip-coating the silica microsphere multiple times significantly reduced the resonance shift, partially compensating for the positive thermo-optical coefficient of silica. The shift direction changed the sign eventually.

We demonstrate a wavelength sensor based on whispering gallery mode (WGM) resonators. For the first time, multiple polymethyl methacrylate (PMMA) microspheres were simultaneously attached to a tapered fiber. WGM resonances from these commercially available PMMA microspheres were observed with a NIR camera, monitoring the scattered light. Circulating light in the WGMs was scattered on the outer layer of the microspheres and appeared as bright spots due to scattering defects. For each laser wavelength fed into the tapered fiber, the light interfered differently for the various sizes of PMMA microspheres. We measured scattered light intensity for different wavelengths and created a barcode for each microsphere. Combining these barcodes into a mode map allowed for unknown wavelength detection. A tunable laser around 1550 nm was used for measurements. As a result, a laser wavelength sensor system with a detection limit of 5 pm was demonstrated. The principles of increasing selectivity, as well as creating a compact device, were discussed.

No abstract