A new method of fringe interrogation based on Fourier analysis was implemented and tested for a capillary polarimetry detector. It has significant advantages over the previously employed depth of modulation (DOM) approach, including speed and alignment insensitivity. The new and old methods were compared using a set of interference fringes typically used to facilitate nanoliter volume polarimetric determinations. Polarimetric response was calculated with both methods over the range from 0 degrees to 180 degrees. The results were found to be in good agreement with Malus Law and indicate that an fast Fourier transform (fft) could be used for real-time capillary scale polarimetry in a probe volume of 40 nL.

A new method of fringe interrogation based on Fourier analysis was implemented and tested for a capillary polarimetry detector. It has significant advantages over the previously employed depth of modulation (DOM) approach, including speed and alignment insensitivity. The new and old methods were compared using a set of interference fringes typically used to facilitate nanoliter volume polarimetric determinations. Polarimetric response was calculated with both methods over the range from 0 degrees to 180 degrees. The results were found to be in good agreement with Malus Law and indicate that an fast Fourier transform (fft) could be used for real-time capillary scale polarimetry in a probe volume of 40 nL.