This article presents the design of a low-cost Wireless Body Sensor Network (WBSN) for monitoring vital signs including a low-cost smart wristwatch that contains an ESP-32 microcontroller and three sensors: heart rate (HR), blood pressure (BP) and body temperature (BT), and an Internet of Things (IoT) platform. The vital signs data are processed and displayed on an OLED screen of the patient’s wristwatch and sent the data over a wireless connection (Wi-Fi) and a Cloud Thing Board system, to store and manage the data in a data center. The data can be analyzed and notified to medical staff when abnormal signals are received from the sensors based on a set parameters from specialists. The proposed low-cost system can be used in a wide range of applications including field hospitals for asymptotic or mild-condition COVID-19 patients as the system can be used to screen those patients out of symptomatic patients who require more costly facilities in a hospital with considerably low expense and installation time, also suitable for bedridden patients, palliative care patients, etc. Testing experiments of a 60-person sample size showed an acceptable accuracy level compared with standard devices when testing with 60 patient-samples with the mean errors heart rate of 1.22%, systolic blood pressure of 1.39%, diastolic blood pressure of 1.01%, and body temperature of 0.13%. According to testing results with 10 smart devices connected with the platform, the time delay caused by the distance between smart devices and the router is 10 s each round with the longest outdoor distance of 200 m. As there is a short-time delay, it does not affect the working ability of the smart system. It is still making the proposed system be able to show patient’s status and function in emergency cases.

To avoid problems related to a school bus service such as kidnapping, children being left in a bus for hours leading to fatality, etc., it is important to have a reliable transportation service to ensure students’ safety along journeys. This research presents a high accuracy child monitoring system for locating students if they are inside or outside a school bus using the Internet of Things (IoT) via Bluetooth Low Energy (BLE) which is suitable for a signal strength indication (RSSI) algorithm. The in/out-bus child tracking system alerts a driver to determine if there is a child left on the bus or not. Distance between devices is analyzed for decision making to affiliate the zone of the current children’s position. A simplified and high accuracy machine learning of least mean square (LMS) algorithm is used in this research with model-based RSSI localization techniques. The distance is calculated with the grid size of 0.5 m × 0.5 m similar in size to an actual seat of a school bus using two zones (inside or outside a school bus). The averaged signal strength is proposed for this research, rather than using the raw value of the signal strength in typical works, providing a robust position-tracking system with high accuracy while maintaining the simplicity of the classical trilateration method leading to precise classification of each student from each zone. The test was performed to validate the effectiveness of the proposed tracking strategy which precisely shows the positions of each student. The proposed method, therefore, can be applied for future autopilot school buses where students’ home locations can be securely stored in the system used for references to transport each student to their homes without a driver.