High-temperature sodium–sulfur batteries operating at 300–350 °C have been commercially applied for large-scale energy storage and conversion. However, the safety concerns greatly inhibit their widespread adoption. Herein, we report a room-temperature sodium–sulfur battery with high electrochemical performances and enhanced safety by employing a “cocktail optimized” electrolyte system, containing propylene carbonate and fluoroethylene carbonate as co-solvents, highly concentrated sodium salt, and indium triiodide as an additive. As verified by first-principle calculation and experimental characterization, the fluoroethylene carbonate solvent and high salt concentration not only dramatically reduce the solubility of sodium polysulfides, but also construct a robust solid-electrolyte interface on the sodium anode upon cycling. Indium triiodide as redox mediator simultaneously increases the kinetic transformation of sodium sulfide on the cathode and forms a passivating indium layer on the anode to prevent it from polysulfide corrosion. The as-developed sodium–sulfur batteries deliver high capacity and long cycling stability.

The development of dual-ion sodium metal batteries (DISBs) with high output voltage and low cost is significantly hindered by dendritic sodium growth and severe electrolyte decomposition. In this work, we report a multifunctional gel polymer electrolyte with fluoroethylene carbonate co-solvent and 1,3propanesultone additive, which exhibits high oxidative stability, constructs stable protective layers on electrode surfaces, and enables uniform plating and intercalation of the cation or anion. The reversible capacity and cyclability of the as-developed DISB is thus significantly improved.

Nonuniform local electric field and few nucleation sites on the reactive interface tend to cause detrimental lithium (Li) dendrites, which incur severe safety hazards and hamper the practical application of Li metal anodes in batteries. Herein, a carbon nanofiber (CNF) mat decorated with ultrafine titanium nitride (TiN) nanoparticles (CNF‐TiN) as both current collector and host material is reported for Li metal anodes. Uniform Li deposition is achieved by a synergetic effect of lithiophilic TiN and 3D CNF configuration with a highly conductive network. Theoretical calculations reveal that Li prefers to be adsorbed onto the TiN sheath with a low diffusion energy barrier, leading to controllable nucleation sites and dendrite‐free Li deposits. Moreover, the pseudocapacitive behavior of TiN identified through kinetics analysis is favorable for ultrafast Li+ storage and the charge transfer process, especially under a high plating/stripping rate. The CNF‐TiN‐modified Li anodes deliver lower nucleation overpotential for Li plating and superior electrochemical performance under a large current density (200 cycles at 3 mA cm−2) and high capacity (100 cycles with 6 mAh cm−2), as well as a long‐running lifespan (>600 h). The CNF‐TiN‐based full cells using lithium iron phosphate and sulfur cathodes exhibit excellent cycling stability.