This work focused on a new technique for the preparation of doxorubicin (DOX) loaded chitosan (CS) nanoparticles (DOX-CS) - formation by electrospray ionization in the presence of tripolyphosphate (TPP) as the stabilizer. The working distance, needle gauge, flow rate, stirring rate, electrospraying voltage and DOX to CS molar ratio were sequentially and individually optimized and found to be a 26 gauge needle, an applied voltage of 13 kV, a flow rate of 0.5 mL/h, a working distance of 8 cm and a stirring rate of 400 rpm. The incorporation of chemically unchanged DOX with the CS into the particles was ascertained by Fourier transformed infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Under these optimized conditions, the DOX-CS particles were found to be nanoparticles of approximately 300-570 (dry particles) or 530-870 nm diameter (hydrated particles), with a PDI and SPAN polydispersity indices of 0.97-0.82 and 0.62-0.64, respectively, for initial DOX loading levels of 0.25-1%, as determined by SEM and particle size analyzer, respectively. Moreover, a high encapsulation efficiency (EE) of DOX into the nanoparticles was attained, ranging from 63.4 to 67.9% EE at 1 to 0.25% DOX loading. Finally, the in vitro DOX release behaviors of the DOX-CS particles revealed a prolonged release of DOX over at least seven hours.
Orientation birefringence and its wavelength dispersion for various types of cellulose esters are reviewed. Cellulose esters such as cellulose acetate propionate and cellulose acetate butyrate show positive orientation birefringence with extraordinary wavelength dispersion, which is determined mainly by the ester groups rather than the main chains. The acetyl group provides negative orientation birefringence with strong ordinary wavelength dispersion, whereas the propionyl and butyryl groups give positive orientation birefringence with weak wavelength dispersion. Although all groups show ordinary wavelength dispersion, the summation of their orientation birefringences gives extraordinary dispersion. Moreover, the wavelength dispersion is dependent on the stretching ratio due to the difference in the orientation relaxation of each group. On the contrary, cellulose triacetate (CTA) shows negative birefringence with ordinary wavelength dispersion because it has no positive contribution. However, doping a plasticizer having positive orientation birefringence changes the orientation birefringence of CTA from negative to positive, and the wavelength dispersion from ordinary to extraordinary. This is attributed to the cooperative orientation of plasticizer molecules to the stretching direction with CTA chains, known as nematic interaction upon a hot drawing process.
Abstract. Sustained release mucoadhesive amoxicillin tablets with tolerance to acid degradation in the stomach were studied. The sustained-release tablets of amoxicillin were prepared from amoxicillin coated with ethyl cellulose (EC) and then formulated into tablets using chitosan (CS) or a mixture of CS and beta-cyclodextrin (CD) as the retard polymer. The effects of various (w/w) ratios of EC/amoxicillin, the particle sized of EC coated amoxicillin and the different (w/w) ratios of CS/CD for the retard polymer, on the amoxicillin release profile were investigated. The physicochemical properties of the EC coated amoxicillin particles and tablets were determined by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, and differential scanning calorimetry. The result showed that the release profiles of amoxicillin were greatly improved upon coating with EC, while the inclusion of CD to the CS retardant additionally prolonged the release of the drug slightly. Overall, a sustained release of amoxicillin was achieved using amoxicillin coated with EC at a (w/w) ratio of 1:1 and a particle size of 75-100 μm. Therefore, the tablet formulation of amoxicillin may be an advantageous alternative as an orally administered sustained-release formulation for the treatment of peptic ulcers.
The purpose of this study was to design and characterise an oral mucoadhesive micellar drug carrier. In this regard, a mucoadhesive hydrophobic cationic aminocellulose was easily synthesised under mild homogeneous conditions with high yield. The cellulose derivative resulted in strongly improved mucoadhesive properties but was pH dependent. Furthermore, the hydrophobic anticancer drug camptothecin was successfully encapsulated into the mucoadhesive cellulose derivative micelles with spherical shape stability of 233 nm in diameter and low particle size distribution. The CPT-loaded nanocarriers provided high encapsulation efficiency about 86.4%. In vitro release, CPT-loaded cellulose derivative micelles showed a reduction in release rate compared with physically pure CPT solution. The release results also indicated that a sustained release of CPT to >80% over 4 d for pH 6.8 and 7.4. Therefore, mucoadhesive hydrophobic cationic aminocellulose micelles seem to be a promising carrier for various pharmaceutical applications especially for poorly water-soluble drug delivery system.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2025 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.