The effect of temperature on polyvinylchloride (PVC) combustion using a downstream tubular furnace was investigated for the formation of polycylcic aromatic hydrocarbons (PAHs) and chlorinated compounds. As the temperature increased, higher levels of PAHs were generated. Chlorinated compounds reached a peak at 600°C, with low emissions recorded at 300 and 900°C. There was a close correlation (R 2 ϭ 0.97) among polychlorinated biphenyls (PCBs), hexachlorobenzene, pentachlorobenzene, and polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs). PAHs at all temperatures were analyzed in the gas phase. PCDD/Fs and PCBs were emitted as a solid phase at 300 and 600°C and as a gas phase at 900°C. For some PAHs, chlorobenzenes, and PCDD/Fs, a mathematical equation between the gas and solid phase and the reciprocal temperature in semilog proportion was derived. The proposed equation, which is log (amount in gas phase/amount in solid phase) ϭ ϪA/T ϩ B, where T is the temperature of the furnace and A and B are constants, for these species relating their gas/solid distributions showed a good relationship.

No abstract

No abstract

Cymbal transducers are frequently used as an array rather than a single element because of their high quality factor and low energy conversion efficiency. When used as an array, cymbal transducers are likely to have a big change in their frequency characteristics due to the interaction with neighboring elements. In this study, we designed an array pattern of cymbal transducers to achieve a wide frequency bandwidth using this property. First, cymbal transducers with specific center frequencies were designed. Next, a 2 × 2 planar array was constructed with the designed transducers, where dielectric polarity directions of the transducers were divided into two cases (i.e., same and different). For the array, the effect of the difference in the center frequencies and the spacing between the transducers on the acoustic characteristics of the entire array was analyzed. Based on the results, the structural pattern of the array was optimized to have the maximum fractional bandwidth while maintaining the transmitting voltage response over a given requirement. The design validity was verified by making cymbal array prototypes, followed by measuring their performances and comparing them with that of the design.

Realization of flexible electronics is an attractive challenge because of its great potential in many applications. However, the design of flexible and highly conductive metal electrodes has been a bottleneck for the fabrication of flexible devices because bulk metals are easily fractured when subjected to elongation or compression. Here, we demonstrate metal− ceramic nanolaminates as electrodes for flexible electronic devices. Insertion of ceramic layers, each with a thickness of a few nanometers, into an otherwise metal electrode significantly improved its strength and bending stability and only slightly reduced its electrical conductivity. Finally, we demonstrated that a touch screen panel fabricated with metal−ceramic nanolaminate electrodes was stable to 200 000 cycles of folding to a bending radius of 3 mm.