Abstract. In this paper we describe a focal plane array (FPA) prototype, based on Vivaldi elements, developed for the Westerbork Synthesis Radio Telescope (WSRT) to increase its instantaneous field of view by a factor 25 and double its current bandwidth. This prototype is the first step in a project that has the ambition to equip most of the WSRT antennas with FPAs to improve the survey speed of the telescope. Examples of scientific applications are surveys of the northern sky in polarised continuum and HI emission, and efficient searches for pulsars and transients.

No abstract

Abstract. We describe a focal plane array (FPA) system, called Apertif, that is being developed for the Westerbork Synthesis Radio Telescope (WSRT). The aim of Apertif is, at frequencies from 1.0 to 1.7 GHz, to increase the instantaneous field of view of the WSRT by a factor of 37 and its observing bandwidth to 300 MHz with high spectral resolution. This system will turn the WSRT into an effective survey telescope with scientific applications ranging from deep surveys of the northern sky of HI and OH emission and polarised continuum to efficient searches for pulsars and transients. We present results obtained with a prototype FPA installed in one of the WSRT dishes. The results obtained with this prototype demonstrate that at decimetre wavelengths FPAs do have the required performance and that they can be used to turn radio telescopes into very effective survey instruments.

We describe the APERture Tile In Focus (Apertif) system, a phased array feed (PAF) upgrade of the Westerbork Synthesis Radio Telescope that transforms this telescope into a high-sensitivity, wide-field-of-view L-band imaging and transient survey instrument. Using novel PAF technology, up to 40 partially overlapping beams are formed on the sky simultaneously, significantly increasing the survey speed of the telescope. With this upgraded instrument, an imaging survey covering an area of 2300 deg 2 is being performed that will deliver both continuum and spectral line datasets, of which the first data have been publicly released. In addition, a time domain transient and pulsar survey covering 15 000 deg 2 is in progress. An overview of the Apertif science drivers, hardware, and software of the upgraded telescope is presented, along with its key performance characteristics.

Aperture arrays have been studied extensively for application in the next generation of large radio telescopes for astronomy, requiring extremely low noise performance. Prototype array systems need to demonstrate the low noise potential of aperture array technology. This paper presents noise measurements for an Aperture Array tile of 144 dual-polarized tapered slot antenna (TSA) elements, originally built and characterized for use as a Phased Array Feed for application in an L-band radio astronomical receiving system. The system noise budget is given and the dependency of the measured noise temperatures on the beam steering is discussed. A comparison is made of the measurement results with simulations of the noise behavior using a system noise model. This model includes the effect of receiver noise coupling, resulting from a changing active reflection coefficient and array noise contribution as a function of beam steering. Measurement results clearly demonstrate the validity of the model and thus the concept of active reflection coefficient for the calculation of effective system noise temperatures. The presented array noise temperatures, with a best measured value of 45 K, are state-of-the-art for room temperature aperture arrays in the 1 GHz range and illustrate their low noise potential.