No abstract

Abstract. Central leader and vase form tree models were built using Finite Element Modelling (FEM). Their main characteristics were chosen to be the same. To get comparable results to real values, acceleration versus time curves of the two types of real trees were processed using FFT method to determine their natural frequencies. The natural frequencies measured on real trees and calculated for the models have shown good similarity. The models were virtually exposed to the effect of horizontal forced vibration in the frequency range of 0-20 Hz. Acceleration-frequency curves were calculated and drawn to find the best frequency values for the highest accelerations and also to see their differences in the limb. For the same purpose, the direction of shaking was also changed. It was found that for the central leader limb shape multidirectional shaking would bring uniform detachment, while for the vase form trees, even the unidirectional shakers are appropriate. Real trees were also shaken and their acceleration-frequency curves were compared with the values of the FEMs. The resultant good similarity proves the ability of the models. The acceleration values achieved in the vase form models were much higher than for the central leader type. The acceleration-frequency curve of the shaker unit can be used to find the best frequency for shaking.

Central leader and Vase form canopy models were built using FEM. Their main characteristics were chosen to be the same. The models were virtually exposed to the effect of steady-state horizontal forced vibration in the frequency range of 0-20 Hz. Acceleration-frequency curves were calculated and drawn to find the best frequency values for the effective detachment and also to see the acceleration differences in the limbs. For the same purpose the direction of shaking was also changed. It was found that for the Central leader canopy shape multidirectional shaking would bring uniform detachment while for the Vase form trees also the unidirectional shakers were appropriate. The acceleration achieved for the Vase form models were much higher than for the Central leader type. The acceleration-frequency curve of the shaker unit can be used to find the best frequency for shaking.