The dosimetric impact from devices external to the patient is a complex combination of increased skin dose, reduced tumor dose, and altered dose distribution. Although small monitor unit or dose corrections are routinely made for blocking trays, ion chamber correction factors, e.g., accounting for temperature and pressure, or tissue inhomogeneities, the dose perturbation of the treatment couch top or immobilization devices is often overlooked. These devices also increase skin dose, an effect which is also often ignored or underestimated. These concerns have grown recently due to the increased use of monolithic carbon fiber couch tops which are optimal for imaging for patient position verification but cause attenuation and increased skin dose compared to the "tennis racket" style couch top they often replace. Also, arc delivery techniques have replaced stationary gantry techniques which cause a greater fraction of the dose to be delivered from posterior angles. A host of immobilization devices are available and used to increase patient positioning reproducibility, and these also have attenuation and skin dose implications which are often ignored. This report of Task Group 176 serves to present a survey of published data that illustrates the magnitude of the dosimetric effects of a wide range of devices external to the patient. The report also provides methods for modeling couch tops in treatment planning systems so the physicist can accurately compute the dosimetric effects for indexed patient treatments. Both photon and proton beams are considered. A discussion on avoidance of high density structures during beam planning is also provided. An important aspect of this report are the recommendations the authors make to clinical physicists, treatment planning system vendors, and device vendors on how to make measurements of surface dose and attenuation and how to report these values. For the vendors, an appeal is made to work together to provide accurate couch top models in planning systems.

The head-scatter factor (Sh) can be measured with a narrow miniphantom or a metal cap provided it is completely covered by the photon beam and its lateral size is thick enough to prevent electron contamination contributions. The effects of lateral electron equilibrium (LEE) and electron contamination on the Sh values were studied. The EGS4 Monte Carlo technique was used to calculate the minimum beam radii (rLEE) required to achieve complete LEE for photon beams ranging from 60Co to 24 MV. The measurement shows that the error introduced to the Sh value due to lateral electron disequilibrium is negligible. The radii of the miniphantoms or the sidewall thicknesses of the caps can be reduced below rLEE provided they are thick enough to prevent the effect of electron contamination.

No abstract