The authors review the recent advances in the development of high‐strength titanium alloys. First, they summarize conventional strengthening approaches and their mechanisms, thecorresponding microstructures, and the optimized mechanical properties. Subsequently, various strengthening strategies for high‐strength titanium alloys are discussed. Finally, examples of the successful development of high‐strength titanium alloys based on amorphous crystallization via solid and semi‐solid sintering are presented. The review of the interrelation between the microstructure, the strengthening, and the properties may provide significant insight into achieving novel high‐strength titanium alloys.

No abstract

No abstract

High-performance titanium alloys with an equiaxed composite microstructure were achieved by sintering and crystallizing amorphous powder. By introducing a second phase in a β-Ti matrix, series of optimized Ti-Nb-Fe-CoAl and Ti-Nb-Cu-Ni-Al composites, which have a microstructure composed of ultrafine-grained and equiaxed CoTi 2 or (Cu,Ni)Ti 2 precipitated phases surrounded by a ductile β-Ti matrix, were fabricated by sintering and crystallizing mechanically alloyed amorphous powder. The as-fabricated composites exhibit ultra-high ultimate compressive strength of 2585 MPa and extremely large compressive plastic strain of around 40%, which are greater than the corresponding ones for most titanium alloys. In contrast, the alloy fabricated by sintering and crystallizing Ti-Zr-Cu-Ni-Al amorphous powder, which possesses significantly higher glass forming ability in comparison with the Ti-Nb-Fe-CoAl and Ti-Nb-Cu-Ni-Al alloy systems, exhibits a complex microstructure with several intermetallic compounds and a typical brittle fracture feature. The deformation behavior and fracture mechanism indicate that the ultrahigh compressive strength and large plasticity of the as-fabricated equiaxed composites is induced by dislocations pinning effect of the CoTi 2 or (Cu,Ni)Ti 2 second phases and the interaction and 2 multiplication of generated shear bands in the ductile β-Ti matrix, respectively. The results obtained provide basis guidelines for designing and fabricating titanium alloys with excellent mechanical properties by powder metallurgy.