The aim of current experimental research is to examine the performance of the Reactive Powder Concrete modified by Pulverized Local Wastes materials. In this research, Reactive Powder Concrete was adapted by using local wastes (finely crushed ceramic tiles wastes) with Portland cement, silica fume, water, and chemical admixture through partially replacement of fine sand for sustainable practice in construction. This study exploited normal curing process at ambient temperatures as an alternative of higher temperatures steam curing for sustainability of construction works. To assess the behavior of the modified Sustainable Reactive Powder Concrete mixes, splitting and compressive strengths of Reactive Powder Concrete were inspected experimentally, and then associated with traditional Reactive Powder Concrete mix (the control mix). Furthermore, the hardened density of the modified Sustainable Reactive Powder Concrete was checked. The inquiry results directed that substituting the fine sand partially by Pulverized Local Wastes (finely crushed ceramic tiles wastes) is an adequate method for construction applications. Consequently, the compressive strength and spilling strength of modified Sustainable Reactive Powder were maintained by using 10 % of finely crushed ceramic tiles wastes. Results illustrate that Reactive Powder Concrete have an insignificant strength loss with 10 % sand replacement for compressive strength and splitting strength. The reduction percent in the compressive strength and splitting strength at 28 days are 12.37% and 8.55%, respectively, linked with related control mix.

In this research, the long-term potential cracking of normal concrete internally cured with clay brick waste as a sustainable approach was investigated. 10% and 15% volume of sand was substituted with corresponding quantity of pre-saturated clay brick waste to enhance the hydration of cement and improve properties of concrete. Four beams internally cured were compared with two control beams. The use of clay brick waste can improve the compressive and splitting tensile strength and also a significant reduction in cracks were observed. Depending on the recorded results, it is demonstrated that the exemplary percentages of clay brick waste to natural fine aggregate was found to be 15%, which developed greatest compressive and splitting tensile strength, and reduce the crack by means of flexural test.

The possibility of improving some properties of precast concrete tiles under static load has been studied in this research. The experimental approach was adopted in this research to investigate the effect of two types of wire mesh reinforcements on some properties of precast concrete tiles especially flexural failure load. The experimental program is divided into three groups with two ages of the test, the result of each age is an average of three specimens; the first group consists of six specimens which refer to reference tiles, the second group consists of eighteen specimens reinforced with different shapes of a metal wire mesh. The third group consists of eighteen specimens reinforced with different shapes of the plastic wire mesh. Three tests were conducted in this research, flexural failure load, density, and absorption. The main conclusion from this research is; the increasing in flexural failure load of specimens tiles according to reference tiles was 10%, 17% and 25% for tiles reinforced with square plastic wire mesh, stripe plastic wire mesh and specific plastic wire mesh, and 33%, 35% and 21% for square metal wire mesh, stripe metal wire mesh, and specific metal wire mesh respectively.

One of the vital aspects in designing self-compacting concrete (SCC) is the amount and type of filler with respect to cement and water. These have a great impact not only on fresh SCC properties (segregation, filling, fluidity, etc.) but also on its hardened properties. In this experimental study, an attempt was conducted to diminish the pores occurrence in SCC by using carbon black as a filler, which is a waste from the rubber industry. The experimental work investigates the SCC properties when crusher dust filler from the aggregate plant was partially replaced by waste carbon black. SCC mixes of two carbon black replacement ratios (2.5% and 5%) were studied to reveal its effect on the fresh and hardened properties, through various tests. The fresh properties were investigated by means of slump flow (t500), J-ring and L-box. The compressive and splitting tensile strengths tests were implemented along with the mix density evaluation to characterize the hardened properties of SCC with black carbon. It has been found that the carbon black has a useful role for the fresh properties of SCC. Indeed, the carbon black provides superior performance for the compressive strength development than crusher dust. In contrast, it slightly worsened SCC splitting tensile strength.

Internal curing has long been utilized to decrease self-shrinkage and consequently the increased danger of concrete cracking prematurely. The measured mechanical characteristics of concrete were studied in five mixes, both with and without internal curing. Two of these mixtures have a 10% replacement rate, with one using ceramic and the other Attapulgite, while the other two have a 20% replacement, with one using ceramic and the other using Attapulgite, and the fifth is a reference mixture with no replacement for comparative reasons. With an increase of 27.93%, the ceramic combination with a 20% replacement rate is judged to have the highest compressive resistance, followed by the Attapulgite mixture with a 20% replacement rate with an increase of 34.2%. The results showed that the ceramic and Attapulgite internal curing purposes were highly effective, especially with a 20% replacement. The use of crushed ceramics and attapulgite as internal curing materials improves the characteristics of concrete.