The conventional method of fiber reinforced polymer (FRP) wrapping around concrete columns uses epoxy as the binder along with synthetic or natural fibers such as carbon, glass, basalt, jute, sisal etc. as the reinforcement. However, the thermal stability of epoxy is a major issue in application areas prone to fire exposure. The current work addressed this major drawback of epoxy by modifying it with a nanofiller, such as multiwalled carbon nanotubes (MWCNT), and reinforcing it using basalt and sisal fibers. The effect of exposure to elevated temperature on the behavior of concrete cylinders externally confined with these FRP systems was analyzed. Three types of specimens were considered: unconfined; confined with sisal fiber reinforced polymer (SFRP); and confined with hybrid sisal basalt fiber reinforced polymer (HSBFRP) specimens. The test samples were exposed to elevated temperature regimes of 100 °C, 200 °C, 300 °C and 400 °C for a period of 2 h. The compressive strengths of unconfined specimens were compared with various confined specimens, and from the test results, it was evident that the mechanical and thermal durability of the FRP systems was substantially enhanced by MWCNT incorporation. The reduction in the compressive strength of the FRP-confined specimens varied depending on the type of the confinement. After two hours of exposure at 400 °C, the compressive strength corresponding to the epoxy–HSBFRP-confined specimens were improved by 15%, whereas a 50% increase in strength corresponding to MWCNT-incorporated epoxy–HSBFRP-confined specimens was observed with respect to unconfined unexposed specimens. The MWCNT-modified epoxy-incorporated FRP-confined systems demonstrated superior performance even at elevated temperatures in comparison to unconfined specimens at ambient temperatures.

No abstract

No abstract

Fiber reinforced polymer (FRP) confinement is recognized as the most promising technique for the strengthening and retrofitting of concrete structures. In order to enhance the performance of conventional epoxy-based FRP composites, nano filler modification of the epoxy matrix was implemented in the current study. In particular, the cyclic loading response of standard concrete specimens externally confined by epoxy-based natural and hybrid fiber reinforced polymer systems was investigated. The confinements were realized with sisal fiber reinforced polymer (SFRP) and hybrid sisal basalt fiber reinforced polymer (HSBFRP). Moreover, the effects of multiwalled carbon nanotubes (MWCNT) were also investigated. Three different specimen sets were considered for study: (i) unconfined specimens, (ii) epoxy-based FRP confined specimens and (iii) MWCNT incorporated epoxy-based FRP confined specimens. The specimens were tested in repeated compressive mode in loading-unloading cycles at increasing displacement levels. The test results revealed that FRP wrapping could enhance the mechanical behavior of unconfined columns in terms of strength and ductility. Moreover, it was evident that the mechanical properties of the epoxy matrix were enhanced by MWCNT incorporation. The developed epoxy-based FRP confinement containing MWCNT ensures improvement in axial strength by 71% when compared with unconfined specimens. The epoxy-based FRP confinement, with and without MWCNT, exhibited a high strain redistribution behavior around the concrete core. In comparison to the unconfined specimens, the confinement could increase the sustained axial strain from 0.6 to 1.4% using epoxy-based FRP confinement and to 1.6% with MWCNT incorporated epoxy-based FRP confinement. Further, an empirical model was developed to predict the ultimate axial stress of concrete columns confined externally with FRP jackets. The ultimate compressive strength obtained from the experimental study was compared with the proposed model, and the observed deviation was lower than 1%.

No abstract