No abstract

Abstract. A potential repository site for high-level radioactive waste should ensure the highest possible safety level over a period of one million years. In addition to design issues, demonstrating the integrity of the barrier is essential as it ensures the long-term containment of radioactive waste. Therefore, a multi-disciplinary approach is necessary for the characterization of the surrounding rock and for the understanding of the occurring physical processes. For site selection, however, the understanding of the respective system is essential as well: Do fault zones exist in the relevant area? Are these active and relevant for interpreting system behavior? What is the role of the existing heterogeneities of the claystone and how do these site-dependent conditions influence the physical effects? To answer these questions, the site-selection procedure requires underground exploration, which includes geophysical and geological investigations on milli- to decameter scales. Their results serve as the basis for numerical modelling. This combined, multi-disciplinary interpretation requires extensive knowledge of the various methods, their capabilities, limitations, and areas of application. In the cyclic deformation (CD-A) experiment in the Mont Terri rock laboratory, the hydraulic–mechanical effects due to excavation and the climatic conditions within the rock laboratory are investigated in two niches in the Opalinus Clay. The twin niches differ mainly with regard to the relative humidity inside them, but are also characterized by different boundary conditions such as existing fault zones, the technical construction of the neighboring gallery, etc. In order to gain insights into the relevance of the individual influences, comparative studies are being carried out on both niches. The presented results provide a first insight into the initial experimental years of the CD-A long-term experiment and illustrate the benefits of multi-disciplinary investigations in terms of system understanding and the scale dependency of physical effects. Amongst other effects, the assessment of the impact of heterogeneities on the deformation behavior and the evolution of pore water pressure is very complex and benefits from geological interpretation and measurements of for example deformation, water content, and pore pressure. The numerical modeling allows statements about the interaction of different processes and thus enables an interpretation of the overall system, taking into account the knowledge gained by the multi-disciplinary investigation.

No abstract

No abstract

Abstract. In Germany, rock salt formations are possible host rock candidates for a repository for heat-emitting radioactive waste. The safety concept of a repository in salt bases on a multibarrier system consisting mainly of the geological barrier salt and geotechnical seals ensuring safe containment. Crushed salt will be used for backfilling of cavities and sealing measures in drifts and shafts due to its favourable properties and its easy availability (mined-off material). The creep of the rock salt leads to crushed salt compaction with time. Thereby, the crushed salts' porosity is reduced from the initial porosity of 30 %–40 % to a value comparable to the porosity of undisturbed rock salt (≤1 %). In such low porosity ranges, technical impermeability is assumed. The compaction behaviour of crushed salt is rather complex and involves several coupled THM processes (Kröhn et al., 2017; Hansen et al., 2014). It is influenced by internal properties like humidity and grain size distribution, as well as boundary conditions such as temperature, compaction rate or stress state. However, the current process understanding has some important gaps referring to the material behaviour, experimental database and numerical modelling. It needs to be extended and validated, especially in the low porosity range. The objective of the KOMPASS project was development of methods and strategies for the reduction of deficits in the prediction of crushed salt compaction leading to an improvement of the prognosis quality. Key results are as follows (KOMPASS Phase 1, 2020): selection of an easily available and permanently producible synthetic crushed salt mixture, acting as a reference material for generic investigations; development and proof of different techniques for producing pre-compacted samples for further investigations; establishment of a tool of microstructure investigation methods to demonstrate the comparability of grain structures of pre-compacted samples with in-situ compacted material for future investigations; execution of various laboratory experiments using pre-compacted samples, e.g. long-term creep tests which deliver reliable information about time- and stress-dependent compaction behaviour; development of a complex experimental investigation strategy to derive necessary model parameters considering individual functional dependencies. Its technical feasibility was successfully verified; benchmarking with various existing numerical models using datasets from three different triaxial long-term tests. The result was not entirely satisfactory; however, the number of influencing factors is small and further validation work has to be done. Overall, the KOMPASS project has made significant progress in the approaches to solving the outstanding question, building the basis for further investigations.