By electrical determinations, digital microscopy and visual observations, the anticorrosive insulation capacity of the paint layers applied to the three sections of a bridge over the Tisza River was assessed. The visual observations have highlighted the fact that on the Eastern section repainted in 2013, biofouling increases are significant (covers up to 10 % of the surface) - both ferns have been identified (Hypogymnia physodes and Xanthoria parietina), filamentous molds (Aspergillus fumigatus and Aspergillus niger) as well as algae and moss (green - capable of photosynthesis). On paint applied in 1986, no bio fouling was visible but the painting material is aged and shows rust traces (5-10 % of the surface) and exfoliation between the paint layers (10-20 % of the surface). No bio fouling and/ or exfoliation/ degradation of the paint layer have been observed on the paint applied in 2014. Determinations of electrical insulation resistance correlated with those of the paint layers� thickness are closely related to the visual observations. The values obtained for the specific resistivity of the paint layers applied in 2013 (with bio fouling increases) are approx. 38 times lower than those applied in 2014. These findings suggest that the painting material used in 1983 for the top coat realization, showed major qualitative vices.

In order to identify the causes that led to microbiological degradation by biofouling increases a top coat painting layer applied to a railway bridge was analyzed by both FTIR and the DSC methods; the analysed painting material was that used to paint the bridge in 2013.The determinations were performed comparatively on samples of a similar painting material after 10 days of curing in a natural atmosphere at 25 � 5 �C, after 60 days of storage under laboratory conditions (22 � 5 �C, RH 60 � 10 %, natural lighting), and on samples from the painting material of a certain railway bridge after approx. 4.5 years (exposed natural weathering of temperate climate with Mediterranean influences). From FTIR determinations, the amount of oxygen containing groups (C = O, C-O, C-O-C, -HO) resulted from ageing under various conditions of the painting material.From DSC determinations, the resistance of the paint to the oxidative degradation decreases with the ageing time as resulted from oxidation onset temperatures and oxidation activation energies values - which decreases with 4 kJ / mole (about 2.2 %) in only 60 days of storage in the laboratory and with 7 kJ/mole (about 3.9 %) following exposure to 100 w/m2 for only 15 h and 29 kJ / mole (over 16 %) after exposure to 4.5 years of natural weathering.