No abstract

No abstract

We report a methodological approach for simulating luminary output radiation, which is achieved by mixing light-emitting diodes (LEDs) in order to match any plant absorption spectrum. Various recorded narrow-band LED spectra of different colors were first characterized and then fitted with a multi-Gaussian model. An optimizing procedure computed the optimal weighting of the relevant parameters so as to minimize the discrepancy between the combined spectrum and the reference target curve. The particle swarm optimization (PSO) method was applied because it is the most suitable technique for mono-objective situations. Within the useful spectral interval, the worst relative standard deviation between the optimized curve and recorded LED spectral power distribution (SPD) was 3.4%. When combining different LED types, the simulated light output showed that we could limit ourselves to selecting only five colored sources. This work will help us to design an optimized 200W laboratory luminaire with a pulse-width switched-mode power supply.

No abstract

No abstract