This tutorial presents the most common ion activation techniques employed in tandem mass spectrometry. In-source fragmentation and metastable ion decompositions, as well as the general theory of unimolecular dissociations of ions, are initially discussed. This is followed by tandem mass spectrometry, which implies that the activation of ions is distinct from the ionization step, and that the precursor and product ions are both characterized independently by their mass/charge ratios. In collision-induced dissociation (CID), activation of the selected ions occurs by collision(s) with neutral gas molecules in a collision cell. This experiment can be done at high (keV) collision energies, using tandem sector and time-of-flight instruments, or at low (eV range) energies, in tandem quadrupole and ion trapping instruments. It can be performed using either single or multiple collisions with a selected gas and each of these factors influences the distribution of internal energy that the activated ion will possess. While CID remains the most common ion activation technique employed in analytical laboratories today, several new methods have become increasingly useful for specific applications. More recent techniques are examined and their differences, advantages and disadvantages are described in comparison with CID. Collisional activation upon impact of precursor ions on solid surfaces, surface-induced dissociation (SID), is gaining importance as an alternative to gas targets and has been implemented in several different types of mass spectrometers. Furthermore, unique fragmentation mechanisms of multiply-charged species can be studied by electron-capture dissociation (ECD). The ECD technique has been recognized as an efficient means to study non-covalent interactions and to gain sequence information in proteomics applications. Trapping instruments, such as quadrupole ion traps and Fourier transform ion cyclotron resonance instruments, are particularly useful for the photoactivation of ions, specifically for fragmentation of precursor ions by infrared multiphoton dissociation (IRMPD). IRMPD is a non-selective activation method and usually yields rich fragmentation spectra. Lastly, blackbody infrared radiative dissociation is presented with a focus on determining activation energies and other important parameters for the characterization of fragmentation pathways. The individual methods are presented so as to facilitate the understanding of each mechanism of activation and their particular advantages and representative applications.

Mass defect is defined as the difference between a compound's exact mass and its nominal mass. This concept has been increasingly used in mass spectrometry over the years, mainly due to the growing use of high resolution mass spectrometers capable of exact mass measurements in many application areas in analytical and bioanalytical chemistry. This article is meant as an introduction to the different uses of mass defect in applications using modern MS instrumentation. Visualizing complex mass spectra may be simplified with the concept of Kendrick mass by plotting nominal mass as a function of Kendrick mass defect, based on hydrocarbons subunits, as well as slight variations on this theme. Mass defect filtering of complex MS data has been used for selectively detecting compounds of interest, including drugs and their metabolites or endogenous compounds such as peptides and small molecule metabolites. Several strategies have been applied for labeling analytes with reagents containing unique mass defect features, thus shifting molecules into a less noisy area in the mass spectrum, thus increasing their detectability, especially in the area of proteomics. All these concepts will be covered to introduce the interested reader to the plethora of possibilities of mass defect analysis of high resolution mass spectra.

The purpose of the present paper was to study some of the underlying physical and technical aspects of high-throughput quantitative matrix-assisted laser desorption/ionization (MALDI) of small drug molecules. A prototype MALDI-triple quadrupole instrument equipped with a high repetition rate laser was employed. Initially, the detection limits and dynamic ranges for the quantitation of four drugs (quinidine, danofloxacin, ramipril and nadolol) were determined. Internal standards were carefully chosen for each of these analytes in terms of structure similarity and fragmentation pathways. Three organic matrices were tested for these assays, resulting in different crystallization behaviors and measurement reproducibilities. a-Cyano-4-hydroxycinnamic acid yielded the best results and was subsequently employed for the quantitative determination of all four analytes. Further experiments considered the role of laser energy and pulse rate on the ablated areas as well as ion signals. Light microscope and scanning electron microscope images allowed the examination of the ablated area of the MALDI spots. The images showed convincing evidence that the ablated area was virtually void of crystals after analysis, with no preferential removal of material in the center of the laser's path. Average values for the amount of material ablated were determined to be 3.9 AE 0.5% of the total spot size, and as low as 19.5 attomoles of analyte were detectable for our most sensitive analyte, ramipril. It was calculated that, under these assay conditions, it was possible to accurately quantify less than 1 femtomole of all analytes with the use of appropriately pure internal standards. These studies showed very promising results for the quantitative nature of MALDI for small molecules with molecular weights less than 500 Da. Copyright # 2005 John Wiley & Sons, Ltd.Matrix-assisted laser desorption/ionization (MALDI) has recently seen an emergence in small molecule analysis, and appears extremely promising for high-throughput analysis and imaging studies. 1,2 One important factor that supported the implementation of MALDI in various applications was the development of atmospheric pressure (AP) MALDI. 3 AP-MALDI sources are relatively inexpensive and can be easily mounted onto several commercial liquid chromatography/mass spectrometry (LC/MS) instruments that are typically used for atmospheric pressure ionization (API) techniques, such as electrospray ionization (ESI) or atmospheric pressure chemical ionization (APCI). MALDI has several advantages over these techniques. Most importantly, MALDI can achieve a high sample throughput, 1,4 making it attractive to analytical laboratories for increasing productivity and efficiency. Furthermore, in comparison to ESI, MAL-DI is not as susceptible to ion suppression from salts or buffers. 5,6 As a result of these advantages, MALDI has recently been shown to permit extremely rapid and quantitative analyses for small molecules. 1,4,7 For the quantitative determination of low molecular weight compounds usin...

Growing interest in the ability to conduct quantitative assays for small molecules by matrix-assisted laser desorption/ionization (MALDI) has been the driving force for several recent studies. This present work includes the investigation of internal standards for these analyses using a high-repetition rate MALDI triple quadrupole instrument. Certain physicochemical properties are assessed for predicting possible matches for internal standards for different small molecules. The importance of similar molecular weight of an internal standard to its analyte is seen through experiments with a series of acylcarnitines, having a fixed charge site and growing alkyl chain length. Both acetyl- and hexanoyl-carnitine were systematically assessed with several other acylcarnitine compounds as internal standards. The results clearly demonstrate that closely matched molecular weights between analyte and internal standard are essential for acceptable quantitation results. Using alpha-cyano-4-hydroxycinnamic acid as the organic matrix, the similarities between analyte and internal standard remain the most important parameter and not necessarily their even distribution within the solid sample spot. Several 4-quinolone antibiotics as well as a diverse group of pharmaceutical drugs were tested as internal standards for the 4-quinolone, ciprofloxacin. Quantitative results were shown using the solution-phase properties, log D and pKa, of these molecules. Their distribution coefficients, log D, are demonstrated as a fundamental parameter for similar crystallization patterns of analyte and internal standard. In the end, it was also possible to quantify ciprofloxacin using a drug from a different compound class, namely quinidine, having a similar log D value as the analyte.

No abstract