Cross-linked polyethylene (XLPE) is one of the most popular insulation materials used in the production of medium and high voltage cables (MV, HV). This article presents the results of research carried out on two types of commercially used insulation materials, modified with the addition of organophilic phyllosilicate (CLOISITE C20A)and halloysite nanotubes (HNTs). The influence of fillers on the mechanical properties of insulating materials is discussed as a potential mechanism for increasing their resistance to the phenomenon of water-tree. SEM and XRD analyses were performed to investigate the morphology and DSC for comparing phase transitions. Mechanical and functional properties for different concentrations of nanofillers, such as their hybrids, were also investigated.

With wind turbines increasing in size, installed at greater distances from the mainland, and greater depths, submarine cables are facing new challenges. Materials and technologies used so far for the production of submarine cables with lead, aluminium, or copper sheaths make them unsuitable or even obsolete for modern solutions such as floating wind farms. The article discusses types of submarine cables, their construction, working conditions, and operational factors, with emphasis placed on the role of the radial water barrier. The focus has been placed on dry and semi-dry designs. The article is also devoted to a discussion regarding directions of further development, possible materials, and constructions that may appear in the future. Current research and results regarding the use of multi-layer coatings with the use of thermoplastic block copolymers for the layer with high moisture absorption are also presented.