This paper deals with an experimental investigation of aerodynamic characteristics of full and partial-length squealer rims in a turbine stage. Full and partial-length squealer rims are investigated separately on the pressure side and on the suction side in the “Axial Flow Turbine Research Facility” (AFTRF) of the Pennsylvania State University. The streamwise length of these “partial squealer tips” and their chordwise position are varied to find an optimal aerodynamic tip configuration. The optimal configuration in this cold turbine study is defined as the one that is minimizing the stage exit total pressure defect in the tip vortex dominated zone. A new “channel arrangement” diverting some of the leakage flow into the trailing edge zone is also studied. Current results indicate that the use of “partial squealer rims” in axial flow turbines can positively affect the local aerodynamic field by weakening the tip leakage vortex. Results also show that the suction side partial squealers are aerodynamically superior to the pressure side squealers and the channel arrangement. The suction side partial squealers are capable of reducing the stage exit total pressure defect associated with the tip leakage flow to a significant degree.

This paper deals with an experimental investigation of aerodynamic characteristics of full and partial-length squealer rims in a turbine stage. Full and partial-length squealer rims are investigated separately on the pressure side and on the suction side in the "Axial Flow Turbine Research Facility" (AFTRF) of the Pennsylvania State University. The streamwise length of these "partial squealer tips" and their chordwise position are varied to find an optimal aerodynamic tip configuration. The optimal configuration in this cold turbine study is defined as the one that is minimizing the stage exit total pressure defect in the tip vortex dominated zone. A new "channel arrangement" diverting some of the leakage flow into the trailing edge zone is also studied. Current results indicate that the use of "partial squealer rims" in axial flow turbines can positively affect the local aerodynamic field by weakening the tip leakage vortex. Results also show that the suction side partial squealers are aerodynamically superior to the pressure side squealers and the channel arrangement. The suction side partial squealers are capable of reducing the stage exit total pressure defect associated with the tip leakage flow to a significant degree.

No abstract

No abstract

We report a different type of microvascular end-to-side anastomosis using "open-Y" technique to increase small recipient vessel size and provide eversion of the vessel ends in end-to-side anastomosis. The purpose of this study was to compare the effectiveness of this technique with conventional end-to-side vessel anastomosis. Twenty rats were used to assess the open-Y technique in end-to-side anastomosis between carotid arteries and external jugular veins and another 20 rats constituted the control group in which conventional end-to-end anastomoses were performed. Statistically, the results at 1 hour and 2 weeks after the procedures favored the open-Y technique. When used in end-to-side anastomosis, the open-Y technique both provides eversion and increases the diameter of the vessel, which in turn ease the procedure and provide a higher rate of patency especially in vessels with a diameter of 0.5 mm.