High strength aluminum alloy is mainly traditional alloy hypoeutectic composition, containing the solid solubility of alloy elements atomic fraction is greater than 2, and reached the alloy trengthening effect by the precipitation of intermetallic compounds in the process of aging. But in more than 150°C, the precipitated phases coarsening, the material performance dramatically, thus limiting its use scope. In the preparation process, the planar flow casting process will melt thrown by 35-80um thick slices with, because the cooling speed can reach 105K/s the process of melt, so the microstructure is very fine, after extrusion. Grain size of about 1um, precipitates spherical and uniform distribution, the size of about 50nm, Al12(Fe,V)3Si phase coarsening rate is low, so the alloy has comprehensive mechanical performance and excellent high temperature stability.

Heat-resistant aluminum alloy because of its low density, low price, good heat resistance and corrosion resistance, has been widely used in aviation, aerospace, weapons and other industrial fields. In this paper, preparation of Al-Fe-V-Si heat-resistant aluminum alloy materials is used in the RS/PM process, and studied the influence law of effect of alloy composition on the microstructure and mechanical properties of heat-resistant aluminum alloy. The results show that, Fe, V, Si element content and Fe/V ratio has great effect on the microstructure and mechanical properties. When the Fe content is too low, the content of Al12(Fe, V)3Si phase is less. Mechanics to improve material properties cannot be maximum; if the content of Fe is excessive, the strength of the material do not increase, but decrease the plastic. The addition of V element can be stabilized in Al12(Fe, V)3Si Si phase; and the addition of Si can inhibit the second-phase dispersion phase coarsening and decomposition, increase the high temperature stability of materials; Fe/V ratio affects the coarsening rate of second-phase particles, thus affecting the thermal stability of materials.