One major challenge in the development of nanoparticle-based therapeutics, including viral vectors for the delivery of gene therapies, is the development of cost-effective purification technologies. The objective of this study was to examine fouling and retention behaviors during the filtration of model nanoparticles through membranes of different pore sizes and the effect of solution conditions. Data were obtained with 30 nm fluorescently labeled polystyrene latex nanoparticles using both cellulosic and polyethersulfone membranes at a constant filtrate flux, and both pressure and nanoparticle transmission were evaluated as a function of cumulative filtrate volume. The addition of NaCl caused a delay in nanoparticle transmission and an increase in fouling. Nanoparticle transmission was also a function of particle hydrophobicity. These results provide important insights into the factors controlling transmission and fouling during nanoparticle filtration as well as a framework for the development of membrane processes for the purification of nanoparticle-based therapeutics.

A number of studies have demonstrated that depth filtration can provide significant adsorptive removal of host cell proteins (HCP), but there is still considerable uncertainty regarding the underlying factors controlling HCP binding. This study compared the binding characteristics of two fine grade depth filters, the X0SP (polyacrylic fiber with a synthetic silica filter aid) and X0HC (cellulose fibers with diatomaceous earth (DE) as a filter aid), using a series of model proteins with well‐defined physical characteristics. Protein binding to the X0SP filter was dominated by electrostatic interactions with greatest capacity for positively‐charged proteins. In contrast, the X0HC filter showed greater binding of more hydrophobic proteins although electrostatic interactions also played a role. In addition, ovotransferrin showed unusually high binding capacity to the X0HC, likely due to interactions with metals in the DE. Scanning Electron Microscopy with Energy Dispersive Spectroscopy was used to obtain additional understanding of the binding behavior. These results provide important insights into the physical phenomena governing HCP binding to both fully synthetic and natural (cellulose + DE) depth filters.