Recently, there is a high interest for appropriate systems and methods to localize the position of people and their devices in indoor environments (e.g. home, office, hospital). From technical and economical points of view, Bluetooth Low Energy (BLE) is one of the promising technologies in this field. This paper deals with the study of performances of this technology for these purposes. For the indoor localization, a received signal strength indication (RSSI) method is used. It was tested in ideal (anechoic chamber) and real (in the office) environment conditions. For the measurement campaign and evaluation of the obtained results a generic framework is proposed. Experimental results (simulation vs. measurement) show similar behaviour of the BLE technology in ideal (no signal reflection) and real (multipath propagation) transmission environments.

No abstract

Nowadays, there are many kinds of technologies to provide multimedia TV content in different formats and picture quality. Three-dimensional (3D) video is one of the next generation TV services with specific features from the video image quality point of view. Naturally, efficient compression tools enabling significant bit rate reduction to ease 3D video distribution are an integral part of any practical 3D video system implementation. In this paper, we present a study of recent and upcoming compression tools for stereoscopic videos. We consider H.264 Advanced Video Coding (AVC), H.264 Annex H -Multiview Video Coding (MVC), H.265 High Efficiency Video Coding (HEVC) and H.265 Annex G -Multiview High Efficiency Video Coding (MV-HEVC) video coding formats to process stereoscopic videos with different properties. To compare the performance of considered compression tools, we provide an analysis of the encoded/decoded stereoscopic video quality using objective metrics.Index Terms-3DTV, 3D video coding, objective video quality metrics, PSNR, SSIM, stereoscopic video, VQM.

The number of wirelessly connected multimedia devices and different communication standards, supported by these devices, is rapidly increasing. However, the appropriate frequency bands (licensed and unlicensed) for data transmission by these standards are very limited. The rising density of wireless networks and their coexistence in the same or adjacent radio frequency (RF) spectrum can significantly decrease the quality of provided services. This paper deals with the study of coexistence between ZigBee (IEEE 802.15.4) and Wireless Fidelity (Wi-Fi) networks, including the IEEE 802.11b/g standards, which operate in the unlicensed Industrial, Scientific and Medical (ISM) band at 2.4 GHz. Firstly, a general simulation model was developed. Secondly, to verify results from simulation by measurement, an appropriate laboratory workplace in anechoic chamber was proposed and realized. Such setup and the measurement principle are briefly described in this paper too. Impact of the IEEE 802.11b/g networks on the ZigBee and vice versa is evaluated by dependence of bit error rate (BER) and error vector magnitude (EVM) on the power imbalance between power levels of considered RF signals, respectively.

No abstract