An iron(III) (FeCl3·6H2O) catalyst was found to be an active catalyst for initiators for continuous activator regeneration atom transfer radical polymerization (ICAR ATRP) of methyl methacrylate (MMA), using triphenylphosphine (PPh3) as a ligand and azobis(isobutyronitrile) (AIBN) as a thermal radical initiator, and 1,4-(2-bromo-2-methylpropionato)benzene (BMPB2) as an ATRP initiator. Effects of reaction temperature, catalyst concentration and AIBN concentration on polymerization were investigated. These results showed that the catalyst was highly efficient for the ICAR ATRP of MMA. For example, even if the catalyst concentration decreased to 34 ppm, the polymerization with the molar ratio of [MMA]0/[BMPB2]0/[FeCl3·6H2O]0/[PPh3]0/[AIBN]0 = 500/1/0.03/1.5/0.1 could be carried out at 60 °C with a conversion 70.4% in 32 h. At the same time, the molecular weight of the obtained PMMA with a narrow molecular weight distribution (M w/M n = 1.37) was consistent with the theoretical one.

It is well known that the recently developed photoinduced metal-free atom transfer radical polymerization (ATRP) has been considered as a promising methodology to completely eliminate transition metal residue in polymers. However, a serious problem needs to be improved, namely, large amount of organic photocatalysts should be used to keep the controllability over molecular weights and molecular weight distributions. In this work, a novel photocatalyst 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene (4CzIPN) with strong excited state reduction potential is successfully used to mediate a metal-free ATRP of methyl methacrylate just with parts per million (ppm) level usage under irradiation of blue light emitting diode at room temperature, using ethyl α-bromophenyl-acetate as a typical initiator with high initiator efficiency. The polymerization kinetic study, multiple controlled "on-off" light switching cycle regulation, and chain extension experiment confirm the "living"/controlled features of this promising photoinduced metal-free ATRP system with good molecular weight control in the presence of ppm level photocatalyst 4CzIPN.

No abstract

No abstract

Fluorescent/magnetic nanoparticles are of interest in many applications in biotechnology and nanomedicine for its living detection. In this study, a novel method of surface modification of nanoparticles was first used to modify a fluorescent monomer on the surfaces of magnetic nanoparticles directly. This was achieved via iron(III)-mediated atom-transfer radical polymerization with activators generated by electron transfer (AGET ATRP). Fluorescent monomer 9-(4-vinylbenzyl)-9H-carbazole (VBK) was synthesized and was grafted from magnetic nanoparticles (ferroferric oxide) via AGET ATRP using FeCl(3)·6H(2)O as the catalyst, tris(3,6-dioxaheptyl)amine (TDA-1) as the ligand, and ascorbic acid (AsAc) as the reducing agent. The initiator for ATRP was modified on magnetic nanoparticles with the reported method: ligand exchange with 3-aminopropyltriethoxysilane (APTES) and then esterification with 2-bromoisobutyryl bromide. After polymerization, a well-defined nanocomposite (Fe(3)O(4)@PVBK) was yielded with a magnetic core and a fluorescent shell (PVBK). Subsequently, well-dispersed bifunctional nanoparticles (Fe(3)O(4)@PVBK-b-P(PEGMA)) in water were obtained via consecutive AGET ATRP of hydrophilic monomer poly(ethylene glycol) methyl ether methacrylate (PEGMA). The chemical composition of the magnetic nanoparticles' surface at different surface modification stages was investigated with Fourier transform infrared (FT-IR) spectra. The magnetic and fluorescent properties were validated with a vibrating sample magnetometer (VSM) and a fluorophotometer. The Fe(3)O(4)@PVBK-b-P(PEGMA) nanoparticles showed an effective imaging ability in enhancing the negative contrast in magnetic resonance imaging (MRI).