The research has been conducted to test the asphalt produced in Latvia using local mineral materials and local recycled modifiers (fiberglass, crumb rubber), as well as the recycled asphalt used in the production of high-modulus asphalt mix, which will meet the local Latvian road construction specifications and will be economically, environmentally and technically more attractive. In the theoretical part, the available sources were studied to establish a theoretical framework, assess possibilities for using recycled materials, define the concept of fiberglass, and consider its performance in asphalt mixes. During the experimental stage of the research, different asphalt mix formulas with glass fiber, crushed rubber, RAP, and other additives used to stabilize asphalt mixtures for surface and base layers were designed in the laboratory; they were compared to the reference mixes using performance tests. Then the mixtures with the best results were used in the test section of a high-intensity local road. The samples of the asphalt layers of the paved test section were tested as well. Two asphalt mixes were designed according to local Latvian road-building specifications, using fiberglass reinforcement 0.15% + 30% RAP for the base layer and crushed rubber 15% and RAP 30%+EVOFLEX CA© variable for the surface layer. The aim of the research is to offer solutions for reducing new asphalt pavement production allowing for the use of recycled asphalt mixes in local road building. The performance tests of the test asphalt mixes showed that recycled asphalt pavement fully meets the requirements of the local Latvian road-building specifications.

Due to environmental issues and rising costs of construction materials, there is an increasing desire to use reclaimed asphalt pavement (RAP) material in road construction. However, using too much of this material may lead to impairment of fundamental properties of asphalt mix. Glass fibre material is a well-known modifier and could be used to compensate possible downgrade of properties. Research articles and theoretical material have shown that adding too much fibre glass reinforcement could cause damage to asphalt mixture. Therefore, in this research, reference mixture has been compared to three projected AC 11 surface mixtures with different amount of fibre glass. The same has been done to HMAC mixtures, but in this case, there is crumb rubber used as mixture modifier. Experimental part has shown that using fibre glass in asphalt mixtures for both construction layers may have positive influence on fundamental parameters of HMAC and AC asphalt mixes, which can be a good solvation for using waste glass fibre in road construction.