We show the general functionalization of cotton fabrics using solution-synthesized CdSe and CdTe nanowires (NWs). Conformal coatings onto individual cotton fibers have been achieved through various physical and chemical approaches. Some involve the electrostatic attraction of NWs to cotton charged positively with a Van de Graaff generator or via 2,3-epoxypropyltrimethylammonium chloride treatments. Resulting NW-functionalized textiles consist of dense, conformal coatings and have been characterized for their UV-visible absorption as well as Raman activity. We demonstrate potential uses of these functionalized textiles through two proof-of-concept applications. The first entails barcoding cotton using the unique Raman signature of the NWs. We also demonstrate the surface-enhancement of their Raman signatures using codeposited Au. A second demonstration takes advantage of the photoconductive nature of semiconductor NWs to create cotton-based photodetectors. Apart from these illustrations, NW-functionalized cotton textiles may possess other uses in the realm of medical, anticounterfeiting, and photocatalytic applications.

No abstract

Magnetite (Fe3O4) and magnetic core‐shell mesoporous silica (Fe3O4‐mSiO2) nanoparticles are employed to coat cotton fibers using a room temperature water‐based direct electrostatic assembly method with polyelectrolytes. Core‐shell nanoparticles are fabricated by coating super‐paramagnetic magnetite clusters with a mesoporous silica layer (mSiO2) using a surfactant‐templating approach. The Fe3O4 clusters are initially synthesized by a co‐precipitation process. The cotton fibers are modified through a layer‐by‐layer technique using dipping cycles with PDDA and PSS polyelectrolytes solutions to enable further nanoparticles attachment. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) images provides morphologic information of the synthesized nanoparticles and the modified cotton fibers. Composition and physicochemical properties are studied by powder XRD, FTIR, and SEM‐EDX methods, and thermogravimetric analysis (TGA) are carried out to determine the amount of nanoparticles adsorbed onto cotton samples. The saturation magnetization (MS) of nanoparticles determined by a vibrating sample magnetometer (VSM) is greater than that of the cotton‐nanoparticles nano‐composites. Potential applications of these composite materials can include protective clothing and transdermal drug delivery systems.

We report on the synthesis of alpha manganese dioxide (α-MnO2) nanorods using natural extracts from Vitis vinifera grape stems and Malus domestica ‘Cortland’ apple peels. We used a two-step method to produce highly crystalline α-MnO2 nanorods: (1) reduction of KMnO4 in the presence of natural extracts to initiate the nucleation process; and (2) a thermal treatment to enable further solid-state growth of the nuclei. Transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM) images provided direct evidence of the morphology of the nanorods and these images were used to propose nucleation and growth mechanisms. We found that the α-MnO2 nanorods synthesized using natural extracts exhibit structural and magnetic properties similar to those of nanoparticles synthesized via traditional chemical routes. Furthermore, Fourier transform infrared (FTIR) shows that the particle growth of the α-MnO2 nanorods appears to be controlled by the presence of natural capping agents during the thermal treatment. We also evaluated the catalytic activity of the nanorods in the degradation of aqueous solutions of indigo carmine dye, highlighting the potential use of these materials to clean dye-polluted water.

In this manuscript, we report on the ordering of the cellulose nanocrystals (CNCs) as they experience shear forces during the casting process. To achieve these measurements, in situ and in real time, we used synchrotron-based grazing incidence wide-angle X-ray scattering (GIWAX). We believe that the GIWAX technique, although not commonly used to probe these types of phenomena, can open new avenues to gain deeper insights into film formation processes and surface-driven phenomena. In particular, we investigated the influence of solution concentration, shear-cast velocity, and drying temperature on the ordering of cellulose nanocrystals (CNCs) using GIWAXS. The films were prepared from aqueous suspensions of cellulose nanocrystals at two concentration values (7 and 9 wt %). As the films were cast, the X-ray beam was focused on a fixed position and GIWAXS patterns were recorded at regular time intervals. Structural characterization of the dry films was carried out via polarized optical microscopy and scanning electron microscopy. In addition, a rheological study of the CNC suspensions was performed. Our results show that the morphology of the CNC films was significantly influenced by shear velocity, concentration of the precursor suspension, and evaporation temperature. In contrast, we observed that the orientation parameter of the films was not significantly affected. The scattering intensity of the peak (200) was analyzed as a function of time, following a sigmoidal profile, hence indicating short- and long-range interactions within the anisotropic domains as they reached their final orientation state. A model capable of describing the resulting film morphologies is also proposed. The results and analysis presented in this manuscript provide new insights into the controlled alignment of cellulose nanocrystals under shear. This controlled alignment has significant implications in the development of advanced coatings and films currently used in a myriad of applications, such as catalysis, optics, electronics, and biomedicine.